DS51795A Datasheet, PDF (20/98 Pages) Microchip Technology – PICkit™ 3 Programmer/Debugger

PICkit™ 3 User’s Guide
The modular cable can be either (1) inserted into a matching socket at the target, where
the target device is on the target board (Figure 2-1), or (2) inserted into a standard
adapter/header board combo (available as a Processor Pak), which in then plugged
into the target board (Figure 2-2).
Note: Older header boards used a 6-pin (RJ-11) connector instead of an 8-pin
connector, so these headers may be connected to the debugger with the
AC164110 ICSP adapter.
For more on standard communication, see Chapter 10. “Hardware Specification”.
FIGURE 2-1:
STANDARD DEBUGGER SYSTEM – DEVICE WITH
ON-BOARD ICE CIRCUITRY
PICkit™ 3
Target Device
or PIM
Target Board
Mini-USB
cable
to PC
Power
FIGURE 2-2:
AC164110
Adapter
STANDARD DEBUGGER SYSTEM – ICE DEVICE
PICkit™ 3
Mini-USB
cable
to PC
Device-ICE
Header
Power
Transition Socket _{Target Board}
DS51795A-page 16
© 2009 Microchip Technology Inc.