DS51795A Datasheet, PDF (61/98 Pages) Microchip Technology – PICkit™ 3 Programmer/Debugger

Debugger Function Summary
TABLE 9-6: PROGRAM MEMORY OPTIONS (CONTINUED)
Automatically
Program after successful
build
After the application code successfully builds, program
this code into the device.
Run after successful program After the application code is successfully programmed
into the target device, run the code.
9.5.2 Settings Dialog, Configuration Tab
Configure debugger operation on this tab.
TABLE 9-7: CONFIGURATION ITEMS
Download Firmware Set up firmware download options.
Auto Download Latest
Firmware
Check to allow automatic download of the latest version of
firmware for the target device (recommended).
Manual Download
Manually select a firmware file to download to the target device.
9.5.3 Settings Dialog, Freeze on Halt Tab
Select peripherals to freeze on halt on this tab.
PIC18 MCU Devices
To freeze/unfreeze all device peripherals on halt, check/uncheck the “Freeze on Halt”
checkbox. If this does not halt your desired peripheral, be aware that some peripherals
have no freeze on halt capability and cannot be controlled by the debugger.
dsPIC30F/33F, PIC24F/H and PIC32MX Devices
For peripherals in the list “Peripherals to Freeze on Halt”, check to freeze that
peripheral on a halt. Uncheck the peripheral to let it run while the program is halted. If
you do not see a peripheral on the list, check “All Other Peripherals”. If this does not
halt your desired peripheral, be aware that some peripherals have no freeze on halt
capability and cannot be controlled by the debugger.
To select all peripherals, including “All Other Peripherals”, click Check All. To deselect
all peripherals, including “All Other Peripherals”, click Uncheck All.
9.5.4 Settings Dialog, Status Tab
View the status of your PICkit 3 system on this tab.
TABLE 9-8:
Versions
STATUS ITEMS
Firmware Suite Version Debugger firmware suite version. The firmware suite consists of
the three items specified below.
Algorithm Plug-in Version Debugger algorithm plug-in version. For your selected device, an
algorithm is used to support the device plugged into the target.
OS Version
Debugger operating system version.
Voltages
PICkit™ 3 VPP
Debugger VPP.
PICkit 3 VDD
Debugger VDD.
Refresh Voltages
Sensing of Status tab items occurs when the tab is activated. To
see updates, click this button.
© 2009 Microchip Technology Inc.
DS51795A-page 57