|
DS51795A Datasheet, PDF (14/98 Pages) Microchip Technology – PICkit™ 3 Programmer/Debugger | |||
|
◁ |
PICkit⢠3 Userâs Guide
FIGURE 1-1:
1
PICkit⢠3 MCU PROGRAMMER/DEBUGGER
2
Legend:
1 â Lanyard Connection
2 â USB Port Connection
3 â Pin 1 Marker
4 â Programming Connector
5 â Status LEDs
6
6 â Push Button (future use)
5
3
4
1.2.1 Lanyard Connection
A convenient lanyard connection is available on the programmer.
1.2.2 USB Port Connection
The USB port connection is a USB mini-B connector. Connect the PICkit 3 to the PC using
the supplied USB cable.
1.2.3 Pin 1 Marker
This marker designates the location of pin 1 for proper connector alignment.
1.2.4 Programming Connector
The programming connector is a 6-pin header (0.100" spacing) that connects to the
target device. See the pinout specification in Figure 1-2.
DS51795A-page 10
© 2009 Microchip Technology Inc.
|
▷ |