DS51795A Datasheet, PDF (63/98 Pages) Microchip Technology – PICkit™ 3 Programmer/Debugger

PICkit™ 3 USER’S GUIDE
Chapter 10. Hardware Specification
10.1 INTRODUCTION
The hardware and electrical specifications of the PICkit 3 programmer/debugger
system are detailed.
10.2 HIGHLIGHTS
This chapter discusses:
• Declaration of Conformity
• USB Port/Power
• PICkit 3 Programmer/Debugger
• Standard Communication Hardware
• Target Board Considerations
10.3 DECLARATION OF CONFORMITY
We
Microchip Technology, Inc.
2355 W. Chandler Blvd.
Chandler, Arizona 85224-6199
USA
hereby declare that the product:
PICkit 3 Programmer/Debugger
complies with the following standards, provided that the restrictions stated in the
operating manual are observed:
Standards: EN61010-1 Laboratory Equipment
Microchip Technology, Inc.
Date: January 2009
Important Information Concerning the Use of the PICkit 3 programmer/Debugger
Due to the special nature of the PICkit 3 programmer/debugger, the user is advised that
it can generate higher than normal levels of electromagnetic radiation which can
interfere with the operation of all kinds of radio and other equipment.
To comply with the European Approval Regulations therefore, the following restrictions
must be observed:
1. The development system must be used only in an industrial (or comparable)
area.
2. The system must not be operated within 20 meters of any equipment which may
be affected by such emissions (radio receivers, TVs etc.).
© 2009 Microchip Technology Inc.
DS51795A-page 59