PIC16F1938 Datasheet, PDF(379/452 Page) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

PIC16F1938 Datasheet, PDF (379/452 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

◁

PIC16(L)F1938/9

30.0 ELECTRICAL SPECIFICATIONS (PIC16(L)F1938/39)

Absolute Maximum Ratings(â )

Ambient temperature under bias....................................................................................................... -40Â°C to +125Â°C

Storage temperature ........................................................................................................................ -65Â°C to +150Â°C

Voltage on VDD with respect to VSS, PIC16F1938/39 ........................................................................ -0.3V to +6.5V

Voltage on VCAP pin with respect to VSS, PIC16F1938/39 .................................................................. -0.3V to +4.0V

Voltage on VDD with respect to VSS, PIC16LF1938/39 ...................................................................... -0.3V to +4.0V

Voltage on MCLR with respect to Vss ................................................................................................. -0.3V to +9.0V

Voltage on all other pins with respect to VSS ........................................................................... -0.3V to (VDD + 0.3V)

Total power dissipation(1) ............................................................................................................................... 800 mW

Maximum current out of VSS pin, -40Â°C ï£ TA ï£ +85Â°C for industrial............................................................... 340 mA

Maximum current out of VSS pin, -40Â°C ï£ TA ï£ +125Â°C for extended ........................................................... 140 mA

Maximum current into VDD pin, -40Â°C ï£ TA ï£ +85Â°C for industrial.................................................................. 255 mA

Maximum current into VDD pin, -40Â°C ï£ TA ï£ +125Â°C for extended .............................................................. 105 mA

Clamp current, IK (VPIN < 0 or VPIN > VDD)ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï®ï±ï 20 mA

Maximum output current sunk by any I/O pin.................................................................................................... 25 mA

Maximum output current sourced by any I/O pin .............................................................................................. 25 mA

Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD â ï¥ IOH} + ï¥ {(VDD â VOH) x IOH} + ï¥(VOl x IOL).

â NOTICE: Stresses above those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for

extended periods may affect device reliability.

ï£ 2011 Microchip Technology Inc.

Preliminary

DS41574A-page 379

▷