TC1302A_13 Datasheet, PDF (16/26 Pages) Microchip Technology – Low Quiescent Current Dual Output LDO

TC1302A/B
7.0 TYPICAL LAYOUT
FIGURE 7-1:
MSOP8 Silk-screen Layer.
When designing the physical layout for the TC1302A/B,
the highest priority should be placed on positioning the
input and output capacitors as close to the device pins
as is practical. Figure 7-1 above represents a typical
placement of the components when using the SMT0805
capacitors.
8.0 ADDITIONAL OUTPUT
VOLTAGES
8.1 Output Voltage Options
Table 8-1 describes the range of output voltage options
available for the TC1302A/B. V_OUT1 and V_OUT2 can be
factory preset from 1.5V to 3.3V in 100 mV increments.
TABLE 8-1: CUSTOM OUTPUT
VOLTAGES
V_OUT1
1.5V to 3.3V
V_OUT2
1.5V to 3.3V
For a listing of TC1302A/B standard parts, refer to the
Product Identification System on page 23.
FIGURE 7-2:
Example.
DFN3x3 Silk-screen
Figure 7-2 above represents a typical placement of the
components when using the SMT0603 capacitors.
DS21333C-page 16
 2003-2012 Microchip Technology Inc.