PIC16F819T-E Datasheet, PDF (108/176 Pages) Microchip Technology – 18/20-Pin Enhanced Flash Microcontrollers with nanoWatt Technology

PIC16F818/819
BTFSS
Syntax:
Operands:
Operation:
Status Affected:
Description:
Bit Test f, Skip if Set
[ label ] BTFSS f,b
0 ≤ f ≤ 127
0≤b<7
skip if (f<b>) = 1
None
If bit ‘b’ in register ‘f’ = 0, the next
instruction is executed.
If bit ‘b’ = 1, then the next
instruction is discarded and a NOP
is executed instead, making this a
2 TCY instruction.
CLRF
Syntax:
Operands:
Operation:
Status Affected:
Description:
Clear f
[ label ] CLRF f
0 ≤ f ≤ 127
00h → (f)
1→Z
Z
The contents of register ‘f’ are
cleared and the Z bit is set.
BTFSC
Syntax:
Operands:
Operation:
Status Affected:
Description:
Bit Test, Skip if Clear
[ label ] BTFSC f,b
0 ≤ f ≤ 127
0≤b≤7
skip if (f<b>) = 0
None
If bit ‘b’ in register ‘f’ = 1, the next
instruction is executed.
If bit ‘b’ in register ‘f’ = 0, the next
instruction is discarded and a NOP
is executed instead, making this a
2 TCY instruction.
CLRW
Syntax:
Operands:
Operation:
Status Affected:
Description:
Clear W
[ label ] CLRW
None
00h → (W)
1→Z
Z
W register is cleared. Zero bit (Z)
is set.
CALL
Syntax:
Operands:
Operation:
Status Affected:
Description:
Call Subroutine
[ label ] CALL k
0 ≤ k ≤ 2047
(PC) + 1 → TOS,
k → PC<10:0>,
(PCLATH<4:3>) → PC<12:11>
None
Call subroutine. First, return
address (PC + 1) is pushed onto
the stack. The eleven-bit
immediate address is loaded into
PC bits<10:0>. The upper bits of
the PC are loaded from PCLATH.
CALL is a two-cycle instruction.
CLRWDT
Syntax:
Operands:
Operation:
Status Affected:
Description:
Clear Watchdog Timer
[ label ] CLRWDT
None
00h → WDT
0 → WDT prescaler,
1 → TO
1 → PD
TO, PD
CLRWDT instruction resets the
Watchdog Timer. It also resets the
prescaler of the WDT. Status bits
TO and PD are set.
DS39598E-page 106
 2004 Microchip Technology Inc.