MLX90316KDC-BDG Datasheet, PDF (19/45 Pages) Melexis Microelectronic Systems – Rotary Position Sensor IC

MLX90316
Rotary Position Sensor IC
14.2. Output Transfer Characteristic
Parameter
Value
CLOCKWISE
0 CCW
1 CW
DP
LNR_A_X
LNR_B_X
LNR_C_X
LNR_A_Y
LNR_B_Y
LNR_C_Y
LNR_S0
LNR_A_S
LNR_B_S
LNR_C_S
0 … 359.9999
0 … 359.9999
0 … 100
0 … 17
-17 … 0 … 17
CLAMP_LOW
0 … 100
CLAMP_HIGH
0 … 100
DEADZONE
0 … 359.9999
MLX90316 xDC – BCS only
OUT2 SLOPE RATIO
-8 … 0 … 8
OUT2 OFFSET
-400 … 400
CLAMP_LOW OUT2
0 … 100
CLAMP_HIGH OUT2
0 … 100
Unit
deg
deg
%
%/deg
%/deg
%
%
deg
-
%
%
%
14.2.1. CLOCKWISE Parameter
The CLOCKWISE parameter defines the magnet rotation direction.
• CCW is the defined by the 1-4-5-8 pin order direction for the SOIC8 package and 1-8-9-16 pin
order direction for the TSSOP16 package.
• CW is defined by the reverse direction: 8-5-4-1 pin order direction for the SOIC8 and 16-9-8-1 pin
order direction for the TSSOP16 package.
Refer to the drawing in the IMC positioning sections (Section 20.3 and 20.6).
14.2.2. Discontinuity Point (or Zero Degree Point)
The Discontinuity Point defines the 0° point on the circle. The discontinuity point places the origin at any
location of the trigonometric circle. The DP is used as reference for all the angular measurements.
3901090316
Rev10
Page 19 of 45
Jul/13