97SD3248 Datasheet, PDF (24/40 Pages) Maxwell Technologies – 1.5Gb SDRAM 8-Meg X 48-Bit X 4-Banks

1.5Gb (8-Meg X 48-Bit X 4-Banks) SDRAM
97SD3248
Write with auto-precharge: In this operation, since precharge is automatically preformed after completing a
burst write or single write operation, a precharge command need not be executed after each write operation.
The command executed for the same bank after the execution of this command must be the bank active
(ACTV) command. In addition, an interval of I_APW is required between the final valid data input and input of
next command.
Burst Write (Burst Length = 4)
Single Write
02.04.05 Rev 3
All data sheets are subject to change without notice 24
©2005 Maxwell Technologies
All rights reserved.