DS4M125 Datasheet, PDF (7/7 Pages) Maxim Integrated Products – 3.3V Margining Clock Oscillator with LVPECL/LVDS Output

3.3V Margining Clock Oscillator with
LVPECL/LVDS Output
Selector Guide
PART
FREQUENCY OUTPUT
(NOM) (MHz)
TYPE
TOP MARK
DS4M125P+33
125
LVPECL
MEP
DS4M125D+33
125
LVDS
MED
DS4M133P+33
133.33
LVPECL
MFP
DS4M133D+33
133.33
LVDS
MFD
DS4M200P+33
200
LVPECL
MJP
DS4M200D+33
200
LVDS
MJD
+Denotes a lead-free package. The lead finish is JESD97 cate-
gory e4 (Au over Ni) and is compatible with both lead-based
and lead-free soldering processes. A + appears anywhere on
the top mark.
Pin Configuration
TOP VIEW
N.C.
+
OE 1
N.C.
6 VCC
MS 2
DS4M125/
DS4M133/
DS4M200
5 OUTN
GND 3 *EP
4 OUTP
Chip Information
SUBSTRATE CONNECTED TO GROUND
PROCESS: BiPOLAR SiGe
Thermal Information
THETA-JA (°C/W)
90
Package Information
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages.
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
10 LCCC
L1053+H2
21-0389
N.C.
N.C.
(5.00mm × 3.20mm × 1.49mm)
*EXPOSED PAD
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 7
© 2007 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.