DS4M125 Datasheet, PDF (2/7 Pages) Maxim Integrated Products – 3.3V Margining Clock Oscillator with LVPECL/LVDS Output

3.3V Margining Clock Oscillator with
LVPECL/LVDS Output
ABSOLUTE MAXIMUM RATINGS
Power-Supply Voltage Range (V_CC) .....................-0.3V to +4.0V
Continuous Power Dissipation (T_A = +70°C) ...................330mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+125°C
Storage Temperature Range ...............................-55°C to +85°C
Soldering Temperature
(3 passes max of reflow)..........................................Refer to the
IPC/JEDEC J-STD-020 Specification.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V_CC = 3.135V to 3.465V, T_A = -40°C to +85°C, unless otherwise noted.) (Notes 1, 2)
PARAMETER
SYMBOL
Operating Voltage Range
V_CC
Operating Current
I_{CC_D}
I_{CC_PU}
I_{CC_PI}
Inactive Current
I_{CC_OEZ}
OUTPUT FREQUENCY SPECIFICATIONS
DS4M125
Frequency
DS4M133
f_O
DS4M200
Frequency Stability

f_TOTAL/f_O
Frequency Stability Over
Temperature
Initial Tolerance
Frequency Change Due to
V_CC
Frequency Change Due to Load
Variation
Aging (15 Years)
Phase Jitter

f_TEMP/f

f_INITIAL/f_V

f_VCC/f

f_LOAD/f_O

f_AGING
J_RMS
Accumulated Deterministic Jitter
Due to Reference Spurs
Accumulated Deterministic Jitter
Due to Power-Supply Noise
Startup Time
Frequency Switch Time
t_STRT
t_SWITCH
CONDITIONS
(Note 1)
LVDS, output loaded or unloaded
LVPECL, output unloaded
LVPECL, output loaded
V_OE = V_IL
MS = 0, OE = 1
MS = 0, OE = 1
MS = 0, OE = 1
Over temperature range, aging, load,
supply, and initial tolerance (Note 3)
V_CC = 3.3V
V_CC = 3.3V, T_A = +25°C
V_CC = 3.3V ±5%
±10% variation in termination
resistance
Integrated phase RMS; 12kHz to 80MHz,
V_CC = 3.3V, T_A = +25°C
No margin 155.52MHz output
10kHz
100kHz (Note 4)
200kHz (Note 4)
1MHz (Note 4)
Input-Voltage High (OE)
V_IH
(Note 5)
MIN
3.135
TYP
3.3
52
49
74
52
MAX
3.465
75
70
100
85
UNITS
V
mA
mA
125
133.33
200
-50
+50
MHz
ppm
-35
+35 ppm
±20
ppm
-3
+3 ppm/V
±1
ppm
-7
+7 ppm
< 0.9
ps
0.6
ps
12.9
26.3
ps
20.1
6.4
1.0
ms
0.5
ms
0.7 x
V_CC
V_CC
V
2 _______________________________________________________________________________________