 English |
|
|
|
|
|
|
|
| MAX1202 Datasheet, PDF (2/24 Pages) Maxim Integrated Products – 5v, 8-cHANNEL, sERIAL, 12-bIT adcS WITH 3v dIGITAL iNTERFACE | |||
| |||
| ◁ |
5V, 8-Channel, Serial, 12-Bit ADCs
with 3V Digital Interface
ABSOLUTE MAXIMUM RATINGS
VDD to GND ................................................................-0.3V to 6V
VL ...............................................................-0.3V to (VDD + 0.3V)
VSS to GND .................................................................0.3V to -6V
VDD to VSS ................................................................-0.3V to 12V
CH0âCH7 to GND ............................(VSS - 0.3V) to (VDD + 0.3V)
CH0âCH7 Total Input Current...........................................±20mA
REF to GND ................................................-0.3V to (VDD + 0.3V)
REFADJ to GND .........................................-0.3V to (VDD + 0.3V)
Digital Inputs to GND .................................-0.3V to (VDD + 0.3V)
Digital Outputs to GND .................................-0.3V to (VL + 0.3V)
Digital Output Sink Current .................................................25mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 11.11mW/°C above +70°C) ...........889mW
SSOP (derate 8.00mW/°C above +70°C) .....................640mW
CERDIP (derate 11.11mW°C above +70°C) .................889mW
Operating Temperature Ranges
MAX1202_C_P/MAX1203_C_P ............................0°C to +70°C
MAX1202_E_P/MAX1203_E_P..........................-40°C to +85°C
MAX1202BMJP/MAX1203BMJP .....................-55°C to +125°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VL = 2.7V to 3.6V; VSS = 0V or -5V ±5%; fSCLK = 2.0MHz, external clock (50% duty cycle); 15 clocks/conversion
cycle (133ksps); MAX1202â4.7µF capacitor at REF pin; MAX1203âexternal reference, VREF = 4.096V applied to REF pin;
TA = TMIN to TMAX; unless otherwise noted.)
PARAMETER
DC ACCURACY (Note 1)
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Resolution
Relative Accuracy (Note 2)
MAX1202A/MAX1203A
INL
MAX1202B/MAX1203B
12
Bits
±0.5
LSB
±1.0
Differential Nonlinearity
Offset Error
Gain Error (Note 3)
Gain Temperature Coefficient
DNL No missing codes over temperature
MAX1202 (all grades)
External reference, 4.096V
External reference, 4.096V
MAX1203A
MAX1203B
±0.8
±1.0
±3.0
±3
±1.5
±3
LSB
LSB
LSB
ppm/°C
Channel-to-Channel
Offset Matching
±0.1
LSB
DYNAMIC SPECIFICATIONS (10kHz sine-wave input, 4.096Vp-p, 133ksps, 2.0MHz external clock, bipolar-input mode)
Signal-to-Noise + Distortion Ratio SINAD
70
dB
Total Harmonic Distortion
(up to the 5th harmonic)
THD
-80
dB
Spurious-Free Dynamic Range
Channel-to-Channel Crosstalk
Small-Signal Bandwidth
Full-Power Bandwidth
SFDR
VIN = 4.096Vp-p, 65kHz (Note 4)
-3dB rolloff
80
-85
4.5
800
dB
dB
MHz
kHz
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese