 English |
|
|
|
|
|
|
|
| MAX1021 Datasheet, PDF (2/40 Pages) Maxim Integrated Products – 10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports | |||
| |||
| ◁ |
10-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
ABSOLUTE MAXIMUM RATINGS
AVDD to AGND .........................................................-0.3V to +6V
DGND to AGND.....................................................-0.3V to +0.3V
DVDD to AVDD .......................................................-3.0V to +0.3V
Digital Inputs to DGND.............................................-0.3V to +6V
Digital Outputs to DGND .........................-0.3V to (DVDD + 0.3V)
Analog Inputs, Analog Outputs and REF_
to AGND ...............................................-0.3V to (AVDD + 0.3V)
Maximum Current into Any Pin (except AGND, DGND, AVDD,
DVDD, and OUT_) ...........................................................50mA
Maximum Current into OUT_.............................................100mA
Continuous Power Dissipation (TA = +70°C)
36-Pin Thin QFN (6mm x 6mm)
(derate 26.3mW/°C above +70°C) ..........................2105.3mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-60°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note: If the package power dissipation is not exceeded, one output at a time can be shorted to AVDD, DVDD, AGND, or DGND
indefinitely.
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(AVDD = DVDD = 2.7V to 5.25V, external reference VREF = 2.5V, fCLK = 3.6MHz (50% duty cycle), TA = -40°C to +85°C, unless
otherwise noted. Typical values are at AVDD = DVDD = 3V, TA = +25°C. Outputs are unloaded, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
ADC
DC ACCURACY (Note 1)
Resolution
10
Integral Nonlinearity
INL
Differential Nonlinearity
DNL
Offset Error
Gain Error
(Note 2)
Gain Temperature Coefficient
Channel-to-Channel Offset
DYNAMIC SPECIFICATIONS (10kHz sine-wave input, VIN = 2.5VP-P, 225ksps, fCLK = 3.6MHz)
Signal-to-Noise Plus Distortion
SINAD
Total Harmonic Distortion
(Up to the Fifth Harmonic)
THD
Spurious-Free Dynamic Range
SFDR
Intermodulation Distortion
Full-Linear Bandwidth
IMD fIN1 = 9.9kHz, fIN2 = 10.2kHz
SINAD > 70dB
Full-Power Bandwidth
-3dB point
CONVERSION RATE (Note 3)
External reference
TYP
±0.5
±0.5
±0.25
±0.025
±1.4
±0.1
61
-70
66
72
100
1
0.8
MAX
±1.0
±1
±2.0
±2.0
UNITS
Bits
LSB
LSB
LSB
LSB
ppm/°C
LSB
dB
dBc
dBc
dBc
kHz
MHz
µs
Power-Up Time
tPU
Internal reference (Note 4)
Conversion
218
clock
cycles
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese