English
Language : 

DS4830_13 Datasheet, PDF (2/30 Pages) Maxim Integrated Products – Optical Microcontroller
DS4830
Optical Microcontroller
Absolute Maximum Ratings
VDD to GND.........................................................-0.3V to +3.97V
SCL, SDA, RST....................................................-0.3V to +3.63V
All Other Pins to GND
except REG18 and REG285................ -0.3V to (VDD + 0.5V)*
Continuous Sink Current.....................20mA per pin, 50mA total
*Subject to not exceeding +3.97V.
Continuous Source Current.................20mA per pin, 50mA total
Operating Temperature Range........................... -40NC to +85NC
Storage Temperature Range............................. -55NC to +125NC
Lead Temperature (soldering, 10s)............................. …+300NC
Soldering Temperature (reflow)................................... …+260NC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional opera-
tion of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Recommended Operating Conditions
(TA = -40NC to +85NC, unless otherwise noted.)
PARAMETER
VDD Operating Voltage
SYMBOL
VDD
(Note 1)
CONDITIONS
Input Logic-High
VIH
Input Logic-Low
VIL
MIN
2.97
0.7 x
VDD
-0.3
TYP MAX UNITS
3.63
V
VDD +
0.3
V
0.3 x
VDD
V
DC Electrical Characteristics
(VDD = 2.97V to 3.63V, TA = -40NC to +85NC, unless otherwise noted. Typical values are at VDD = 3.3V, TA = +25NC.)
PARAMETER
Supply Current
Brownout Voltage
Brownout Hysteresis
1.8V Regulator Initial Voltage
2.85V Regulator Initial Voltage
SYMBOL
CONDITIONS
ICPU
CPU mode, all analog disabled
(Notes 2, 3)
IFASTCOMP
ISAMPLEHOLDS Both sample/hold
IADC
IDACS
Per channel (Note 4)
VBO
Monitors VDD (Note 1)
VBOH
Monitors VDD (Note 1)
VREG18
(Note 1)
VREG285 (Note 1)
MIN TYP MAX
4.8
2
1.5
2.8
0.6
2.7
0.07
1.71 1.8 1.89
2.8 2.85 2.9
UNITS
mA
V
V
V
V
Maxim Integrated
  2