MAX101A Datasheet, PDF (16/16 Pages) Maxim Integrated Products – 500Msps, 8-Bit ADC with Track/Hold

500Msps, 8-Bit ADC with Track/Hold
________________________________________________________Package Information
PIN FIN HEATSINK
FORCED CONVECTION PARAMETERS
23
21
19
17
15
0° Angle*
13
11
45° Angle*
9
7
0 100 200 300 400 500
VELOCITY (ft /min)
*DIRECTION OF AIRFLOW ACROSS HEATSINK
E1
E
E2
e
S
D1
D
D2
PIN #1
b
C
A2 A1
DIM ^{MILLIMETERS INCHES}
MIN MAX MIN MAX
A 17.272 18.288 0.680 0.720
A1 1.041 1.270 0.041 0.050
0.060±.005(7x)
A2 3.048 3.302 0.120 0.130
b 0.406 0.508 0.016 0.020
C 0.228 0.279 0.009 0.011
D 29.184 29.794 1.149 1.173
D1 44.196 44.704 1.740 1.760
D3
D2 25.298 25.502 0.996 1.004
D3 28.448 28.829 1.120 1.135
e 1.270 BSC 0.050 BSC
E 29.184 29.794 1.149 1.173
E1 44.196 44.704 1.740 1.760
0.075±.020(6x) _{E2 25.298 25.502 0.996 1.004}
EQUAL SPACES _{E3 28.194 28.702 1.110 1.130}
S 1.930 2.184 0.076 0.086
5°–6°
E3
A
0.060±.005
84-PIN CERAMIC FLAT
PACK WITH HEAT SINK
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 [phone]
© 1996 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.