3-644043-4 Datasheet, PDF(78/84 Page) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

3-644043-4 Datasheet, PDF (78/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

◁

MTA, CST-100 II, SL-156 and

AMP Economy Power (EP) Connectors

Mass Termination Tooling

(Typical Tooling

Combinations)

MTA Application Tooling Options (Continued)

Manual Bench Tool with

Applicator and Holding Fixture

Power Units

Manual Bench Tool â

Arbor Frame Assembly

Part No. 58024-1

I Applicator and holding

fixture can be oriented for

operator convenience for

closed-end or feed-thru

terminations

I Ram height (insertion

depth) is easily adjusted

I May be bench mounted

Air Harness Tool with

Applicator

Air Harness Tools â

Hand-Held Power Unit

with Applicator

Part No. 58575-1 (MTA-100)

Part No. 58576-1 (MTA-156)

I Applicator can be rotated

360Â° for orientation with

holding fixture

I Insertion depth is easily

adjusted

I Operates at air pressure

between 75 and 95 psi

[5.17 and 6.55 bar]

Air Bench Machine

Air Bench Machine â

Pneumatic Unit

Part No. 91112-2

I Operated by a foot

switch

I Operates at air pressure

between 80 and 90 psi

[5.52 and 6.21 bar]

I Not recommended for

notching cable with more

than 14 conductors

2700 lb Air Bench Machine with

Ribbon Cable Notcher Assembly

2700 lb Air Bench Machine â

Part No. 312522-1

I Operated by a foot

switch

I Capable of exerting

2,700 lb [12,000 N] of

force at minimum 80 psi

[5.52 bar] air pressure

I May be bench mounted

Applicators and Notcher Assemblies

Manual Bench Tool with Applicator and Tape Feed Track

Applicator and Holding Fixture

I Wires are laced into

plastic combs for mass

termination

I Trims excess wire for

closed-end terminations

I Holding fixture may be

mounted to a harness

board

Applicator and Tape Feed Track

I Tape-mounted connectors

are transferred from prod-

uct reel to feed track by

simply pulling on the free

end of the carrier tape

I Connectors are fed using

a simple spring-loaded

pusher

I Feed stop easily adjusted

for different connector

sizes

Ribbon Cable Notcher Assembly

I Notch cable with up to

28 conductors for .100

centerline, and 24

conductors for .156

centerline

I Pressure plate holds

cable in position during

notching

I Scrap conveniently

removed through a chute

with a blast of air from a

built-in air valve

Ribbon Cable Notcher

Assembly

Part Number

854449-2

854449-4

854449-3

Wire Size

AWG

26-28

22-28

18-24

Centerline

.100

2.54

.100

2.54

.156

3.96

Used With

Manual Bench Tool

58024-1

Air Bench Machine

91112-2

2700 lb Bench Machine

312522-1

AMP-O-LECTRIC

Bench Machine 1-471273-3

(with Conversion Kit 690675-2)

Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC

Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb

Air Bench Machine.

Catalog 82056

Revised 6-08

www.tycoelectronics.com

Dimensions are in inches and

millimeters unless otherwise

specified. Values in brackets

are metric equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

USA: 1-800-522-6752

Canada: 1-905-470-4425

Mexico: 52-55-1106-0800

C. America: 57-1-254-4444

South America: 55-11-2103-6000

Hong Kong: 852-2735-1628

Japan: 81-44-844-8013

UK: 44-208-420-8341

▷