3-644043-4 Datasheet, PDF(77/84 Page) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

3-644043-4 Datasheet, PDF (77/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

◁

MTA, CST-100 II, SL-156 and

AMP Economy Power (EP) Connectors

MTA Application Tooling Options (Continued)

One-At-A-Time Termination

Tooling (Typical Tooling

Combinations)

Manual Hand Tool with

Interchangeable Head

Power Units

Manual Hand Tool â

Pistol Grip Handle

Part No. 58074-1

I Easy to use

I Ratchet control will not

release the trigger until it

is fully bottomed

I Head may be rotated for

user convenience

Air Hand Tool with

Interchangeable Head

Air Hand Tool â

Pistol Grip Pneumatic Handle

Part No. 58075-1

I Light weight

I Operates at air pressure

between 40 and 70 psi

[2.76 and 4.83 bar]

I Head may be rotated for

user convenience

Air Bench Mount Tool with

Interchangeable Head and

Foot Switch

Electric Bench Machine with

Interchangeable Head

Air Bench Mount Tool â

Bench Mount Power Assembly

Part No. 58338-1

I May be mounted with

interchangeable head

pointed up or down

I Operated by a foot

switch

I Operates at air pressure

between 40 and 70 psi

[2.76 and 4.83 bar]

Electric Bench Machine â

IDC Power Unit

Part No. 931800-1

I All electric: 120 VAC,

60 Hz, 2 A

I Compact, portable and

quiet

I Operated by a foot

switch

Air Bench Mount Tool with

Interchangeable Head and Loose-Piece Feed Track

Electric Bench Machine with

Interchangeable Head and

Tape Feed Track

AMP-O-LECTRIC Bench

Machine with Special Applicator

Interchangeable Heads and Applicators (Refer to page 76 for part numbers.)

Interchangeable Head

I Terminates one

unstripped wire per cycle

I Aligns and holds the

connector in place for

each termination

I Automatically advances

the connector after each

termination

Interchangeable Head and

Loose-Piece Feed Track

I No special setup required

I Connectors are easily

loaded into feed track

I Connectors are fed using

a simple spring-loaded

pusher

Interchangeable Head and

Tape Feed Track

I No special setup required

I Tape-mounted connectors

are transferred from prod-

uct reel to feed track by

simply pulling on the free

end of the carrier tape

I Connectors are fed using

a simple spring-loaded

pusher

T-Handle Maintenance Tool

Special Applicator

I Connectors are easily

hand loaded into feed

track

I Automatically advances

the connector after each

termination

I Cannot be cycled until

the connector is properly

positioned

Catalog 82056

Revised 6-08

www.tycoelectronics.com

Dimensions are in inches and

millimeters unless otherwise

specified. Values in brackets

are metric equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

USA: 1-800-522-6752

Canada: 1-905-470-4425

Mexico: 52-55-1106-0800

C. America: 57-1-254-4444

South America: 55-11-2103-6000

Hong Kong: 852-2735-1628

Japan: 81-44-844-8013

UK: 44-208-420-8341

▷