3-644043-4 Datasheet, PDF (59/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Crimp Contacts and Keying Plugs
Contacts
Material and Finish
.012 [0.3] bright tin plated brass or
phosphor bronze; .012 [0.3] pre-tin
brass; or .012 [0.3] brass or phosphor
bronze with .000030 [0.00076] gold
over nickel (see chart)
I All tin-plated contacts are
post lubricated to resist
fretting corrosion
I Maximum insulation
diameter is .105 [2.67]
I Wire range is 18-30 AWG
[0.9-0.06 mm²]
.115
[2.92]
.180
[4.57]
.121/.115
[3.07/2.92]
A
High Force
(6.5 Amp Max. Current Rating)
.131 ±.004
[3.33 ±0.10]
B
Low Force
(6.5 Amp Max. Current Rating)
.145/.140
[3.68/3.56]
.230
[5.84]
C
Hooded (Dual Wipe)
(10 Amp. Max. Current Rating)
Application Note
Part No. 640252 has a
higher mating and un-
mating force than Part
No. 350980 and is recom-
mended to be used only in
housings with 1 through 12
positions.
Part No. 350980 can be
used in any size housing
but is recommended to be
used in housings with 13
through 24 positions.
Part No. 770476 is recom-
mended for use in any size
housing. Its mating force is
similar to Part No. 350980
while unmating force is
similar to 640252.
For housings, see pages 60
and 61.
Keying Plugs
Material (RoHS Compliant)
UL94V-2 rated, nylon, natural color
Wire Size
AWG mm²
24–30
0.2-0.06
Contact
A
A
18–24
0.9-0.2
B
C
.300
[7.62]
Material and Finish
brass, pre-tin plated
brass, bright tin plated
brass, pre-tin plated
brass, RoHS Compliant
brass, bright tin plated
brass, pre-tin plated
brass, gold plated
brass, RoHS Compliant
phosphor bronze, bright tin plated
phosphor bronze, gold plated
phosphor bronze, RoHS Compliant
Part Numbers
Strip
Loose Piece
641550-1
—
640252-1
640252-2
3-640252-1
350980-1
350980-2
350980-3
3-350980-1
770476-1
770476-2
3-770476-1
640706-1
640706-2
3-640706-1
640707-1
—
770258-1
3-640707-1
770522-1
770522-2
3-770522-1
Application Tooling
Extraction Tool
Part No. 90471-1
Loose Piece Contacts —
PRO-CRIMPER II Hand Tool
Part No. 58614-1 (408-4228)
[For field service use only]
For CERTI-CRIMP hand tool, contact
Technical Support.
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator 680211-3
(Request Catalog 65828)
AMP-O-LECTRIC Model “K”
Termination Machine* Applicator
466468-2
AMP-O-MATIC Stripper-Crimper
Machine* SCA 466947-1 or 567828-1
(with CQM) (Request Catalog 65004)
AMPOMATOR CLS IV+ Lead Making
Machine* Applicator 466468-1
(Request Catalog 82659)
*Requires applicators. For part
numbers, call Technical Support.
.225
[5.72]
.300
[7.62]
Keying Plug
Part No. 640254-1
Keying Pin
Part No. 640255-1
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
59
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341