3-644043-4 Datasheet, PDF (75/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Wire Termination Flowchart
Choose the appropriate MTA Connector from the MTA Catalog 82056.
Select the proper wire style and AWG for the chosen MTA Connector
(Refer to pages 70-74).
Choose the MTA Termination Tooling (Refer to pages 76-79).
Terminate the Wire-to-MTA Connector per Application Tooling Instruction Sheet.
Inspect the MTA Wire Termination per Application Specification, especially the wire
depth. See illustrations: 114-13072 — MTA-50 Connectors, 114-1019 — MTA-100
Connectors, 114-1020 — MTA-156 Connectors, Posted Connector, Card Edge,
114-1048 — MTA-156 Quad Connectors, 114-1031 — MTA-100 Ribbon Cable
Connector Assembly, and 114-1032 — MTA-156 Ribbon Cable Connector Assembly.
Top of
Contact
A
B Min.
Conductor
Bare wires will not be visible
beyond back of housing
Bare wires
will not extend
above top of contact
Centerline of Conductor
Back of Housing
Insulation Strain Relief
Conductor
Insulation will be contained
within the confines of the
insulation strain relief as indicated
Connector
MTA-100
MTA-156
A
.069–.087
[1.75-2.21]
.090–.113
[2.29-2.87]
B
.040
[1.02]
.060
[1.52]
Adjust the Termination Tooling (if needed) per Tooling Instruction Sheet
(repeat the step above).
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
75
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341