3-644043-4 Datasheet, PDF (28/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Friction Lock High Temperature Headers—Straight and Right-Angle
Material and Finish
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647050 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647050-0
All part numbers are the RoHS
equivalent version. Example:
No. of
Pos.
Standard
Prefix/Suffix
Lead Free
RoHS
Prefix/Suffix
2
647050-2 3-647050-2
thru
12 1-647050-2 4-647050-2
13 1-647050-3
NA
thru
18 1-647050-8
NA
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
For use with Infrared Reflow Process
Straight Post (.025 [0.64] Square)
Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Right-Angle Post (.025 [0.64] Square)
.250
[6.35]
A
.025
[0.64]
Sq.
.113
[2.87]
Post No. 1
.550
[13.97]
.290
[7.37]
.250
[6.35]
.040
[1.02]
Max.
.347
[8.81]
.113
[2.87]
A
.025
[0.64]
Sq.
Post No. 1
.112
[2.84]
.290
[7.37]
.040
[1.02]
Max.
.347
[8.81]
.100
[2.54]
.050
[1.27]
.125
[3.18]
.130
[3.30]
.060
[1.52]
Pre-Tinned Land
Both Sides Typ.
.040
[1.02]
Pre-Tinned Plated
Thru Hole Typ.
.100
[2.54]
Typ.
.100
[2.54]
.050
[1.27]
.125
[3.18]
.008
[0.20]
Min. Thk. Solder
Paste In Area Shown
Post No. 1
.300
[7.62]
.0325
[0.826]
.065
[1.65]
.150
[3.81]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board
Base Part Numbers
Straight Posts
Header
Part Nos.
RoHS
Equiv.
Straight Posts (Tube Loaded)
Header
Part Nos.
RoHS
Equiv.
Standard UL94V-0, Tin Plated
647050
32-42
647295
Standard UL94V-0, .000030 [0.00076] Gold Plated
647116
32-42
647297
Standard UL94V-0, .000015 [0.00038] Gold Plated
647078
32-42
647296
32-42
32-42
32-42
Right-Angle Posts
Header
Part Nos.
RoHS
Equiv.
647051
32-42
647117
32-42
647079
32-42
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
28
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341