3-644043-4 Datasheet, PDF (58/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.156 [3.96] Centerline SL-156 Crimp Contacts and Housings
Product Facts
I Rugged wire-to-board
interconnection to mate
with .045 square or round
post headers or staked
posts on .156 centers
I Standard Connectors accept
wire range of 18–24 AWG
[0.9–0.2 mm^] and LID
Connectors accept wire
range of 18–24 AWG
[0.9–0.2 mm^] and a lim-
ited 16 AWG [1.29–1.42
mm^] (2550–2800 CMA)
I Two-piece interconnection
system (connector/header)
I Housing made of flame
retardant nylon
I Available in 1- through
24-position connector
configurations
I Connectors are end-to-end
stackable
I Wire-to-board system offers
polarization with friction
lock for positive mating
I Meets the material
requirements of Table 23.1
of UL1410 Standard for
High-Voltage Television
Receivers and Video
Productions
I Recognized under the
Component Program of
Underwriters
Laboratories Inc., ^R
File No. E28476
I Certified by Canadian
Standards
R
Association,
File No. LR7189
Technical Documents
Product Specification
108-1049, 108-1049-1, 108-1049-2
Application Specification
114-1021
These matrixes represent only the housing and header
combinations. You also need to consider the plating on
the contacts and headers. Gold contacts with gold
headers and tin contacts with tin headers.
Matrix for Tin Plated
Part Numbers
The AMP SL-156 connec-
tors shown on the following
pages are designed to
mate with .045 [1.14]
square or round post
headers or staked posts on
.156 [3.96] centers.
The wire-to-board
connector is a two-piece
connector system with the
wire crimped to the contact,
then inserted into the hous-
ing. This product mates with
the MTA-156 flat, polarized
and friction lock header, or
staked posts (not MTA-156
shrouded headers).
Performance Data
Voltage Rating — 250 vac
Current Rating —
10 amp max. at 250 vac
Low-Level Resistance —
3.0 m⍀ max. initial
Dielectric Withstanding Voltage —
2000 vac/1 min.
Insulation Resistance —
1000 M⍀ min. initial
Operating Temperature —
Ϫ55Њ C to ϩ105Њ C
The Large Insulation
Diameter (LID) Contacts
and Housings are for use
in applications where wire
insulation is up to .112
[2.84] in diameter.
Headers
Standard LID
640250 647401
640251 647400
770849 647402
Y Y Y NY Y Y
YY Y YY Y Y
Y Y Y NY Y Y
YYY NY YY
YYY YY YY
YYY NY YY
YY
YY
YY
YY Y YNY Y Y NYY
YYY YYYY Y YYY
YYY YNYY Y NYY
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Headers
Standard LID
640250 647401
640251 647400
770849 647402
YYYNYYYYYYNYYYYY YYYYN
YYYYYYYYYYYYYYYY YYYYY
YYYNYYYYYYNYYYYY YYYYN
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
58
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Headers
Standard LID
640250 647401
640251 647400
770849 647402
YYYNYYYYY YYYYYNY
YYYYYYYYY YYYYYYY
YYYNYY Y YY YYYYYNY
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341