MAZS360GML Datasheet, PDF (5/22 Pages) Tyco Electronics – Telecommunications & Networking Devices

Product Series: Size, Current Rating, Voltage Rating, Typical Resistance for
Table T1
Telecommunications and Networking Devices
Voltage Rating (V_AC)*
(Interrupt)
Specification
Hold Current (A)
0.055
0.080
0.100
0.110
0.120
0.130
0.145
0.150
0.160
0.170
0.183
0.184
0.200
0.250
0.400
TCF250
250
ITU
GR-1089
Ports 2 & 4
TRF250
250
ITU
GR-1089
Ports 2 & 4
TS250
250
ITU
GR-1089
Ports 2 & 4
TSV250
250
ITU
GR-1089
Ports 2 & 4
TSL250
250
TS600
TSM600
600
TRF600
600
GR-1089
Ports 2 & 4
UL60950
GR-1089
Ports 1, 3, & 5
UL60950
GR-1089
Ports 1, 3, & 5
—
—
11.0Ω
—
10.5Ω
—
7.0Ω
—
—
—
—
—
—
—
—
20.0Ω
17.0Ω
—
7.0Ω
8.0Ω
—
4.5Ω
—
—
—
1.3Ω
1.9Ω
—
—
—
—
—
—
—
—
9.0Ω
—
—
—
—
—
—
—
—
—
—
—
—
—
—
5.5Ω
—
—
—
—
—
—
—
—
—
—
8.0Ω
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
11.0Ω
—
—
8.5Ω
3.5Ω
1.2Ω
—
—
—
—
—
—
—
8.0Ω
6.0Ω
—
—
—
—
—
1.2Ω
Voltage Ratings for Telecommunications and Networking Devices
For circuit protection telecommunications devices there are two applicable voltage ratings. These are V_MAX Operating and
V_MAX Interrupt. To help understand the nature of these two different voltage ratings, the following definitions are provided:
V_MAX Operating : For telecommunications devices this is the voltage used to obtain component recognition under UL1434. Most circuit
protection devices are certified at 60V but can withstand higher V_MAX Interrupt conditions as noted above.
See Table T3 for its V_MAX Operating.
*V_MAX Interrupt : Under specified conditions this is the highest voltage that can be applied to the device at the maximum current. Devices
have been designed to trip safely under higher power level cross conditions, as listed above, to assist equipment in
meeting the appropriate industry conditions.
12
RoHS Compliant, ELV Compliant
217