MAZS360GML Datasheet, PDF (14/22 Pages) Tyco Electronics – Telecommunications & Networking Devices

Physical Characteristics and Environmental Specifications for
Table T5
Telecommunications and Networking Devices
Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C)
TS600†
Physical Characteristics
Terminal material
Insulating material
Flammability
Soldering characteristics
Solder heat withstand
Tin-plated brass
Nylon resin (UL94V-0), 1000V dielectric rating
IEC 695-2-2 Needle Flame Test for 20s
ANSI/J-STD-002, Category 3
IEC-STD 68-2-20, Test Tb, Section 5 Method 1A
Cont’d
Environmental Specifications
Test
Passive aging
Humidity aging
Thermal shock
Solvent resistance
Conditions
60°C, 1000 hours
85°C, 1000 hours
85°C, 85% RH, 1000 hours
125°C, -55°C (10 times)
MIL-STD-202, Method 215F
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
TSM600†
Physical Characteristics
Terminal material
Insulating material
Flammability
Soldering characteristics
Solder heat withstand
Tin-plated brass
Nylon resin (UL94V-0), 1000V dielectric rating
IEC 695-2-2 Needle Flame Test for 20s
EIC60068-2-58, Method 7
IEC-STD 68-2-20, Test Tb, Section 5 Method 1A
Environmental Specifications
Test
Passive aging
Humidity aging
Storage humidity
Thermal shock
Solvent resistance
Conditions
60°C, 1000 hours
85°C, 1000 hours
85°C, 85% RH, 1000 hours
Per IPC/JEDEC J-STD-020A Level 2a
125°C, -55°C (10 times)
MIL-STD-202, Method 215J
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
† 600V_AC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements.
12
226
RoHS Compliant, ELV Compliant