108-60034 Datasheet, PDF (5/7 Pages) Tyco Electronics – AMP Connector, USB Consortium, Plug & Receptacle Lead Free Version

3.6 Product Qualification and Requalification Test Sequence
Test of Examination
Examination of Product
Termination Resistance
Insulation Resistance
Dielectric Withstanding Voltage
Capacitance
Solder ability
Vibration
Physical Shock
Durability
Mating Force
Unmating force
Cable Retention
Thermal Shock
Humidity-Temperature Cycling
Temperature Life
Mixed flowing gas
Test Group(a)
1
1, 10
3,7
5
2
3
45
Test Sequence (b)
1, 5 1, 5 1, 9 1, 3
2.4 2.4
3, 7
4, 8
2
2
6
4
2
8
9
5
6
3(c)
3(c)
NOTE
(a) See Para 4.1.A.
(b) Numbers indicate sequence in which tests are performed
(b) Precondition samples with 10 cycles durability
Figure 2
4
QUALITY ASSURANCE PROVISIONS
4.1 Qualification Testing
A. Sample Selection
Sample shall be prepared in accordance with applicable Instruction Sheet and shall be selected
at random from current production Test group 1,2,3and 4 shall each consist of minimum of 8
connectors. Test group 5 shall consist of a minimum of 8 printed circuit board receptacles
ASHL-0005- ES REV A
Tyco Electronics
AMP Shanghai Ltd
PAGE NO
5
108-60034
REV LOC
O _ES