108-60034 Datasheet, PDF (1/7 Pages) Tyco Electronics – AMP Connector, USB Consortium, Plug & Receptacle Lead Free Version

Product Specification
108-60034
AMP Connector
USB Consortium, Plug & Receptacle
Lead Free Version
1.
Scope:
1.1 Contents:
This specification covers the requirements for product performance, test methods and quality
requirements of AMP* Universal Serial Bus(USB) consortium plug and receptacle connectors.
These connectors are mounted plug and printed circuit board mounted receptacle connectors.
1.2 Qualification:
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
2.
Applicable Documents
The following documents form a part of this specification to the extent specified herein. In the event
of conflict between the requirements of this specification and the product drawing, the product
drawing shall take precedence. In the event of conflict between the requirements of this specification
and referenced documents, this specification shall take precedence.
2.1 AMP Specifications:
A. 109-1:
General Requirements for Test Specifications
B. 109 Series :
Test Specifications as indicated in Figure 1. (Comply with
MIL-STD-202, MIL-STD-1344 and EIA RS-364)
C. Corporate Bulletin 401-76: Cross-reference between AMP Test Specifications and Government
or Commercial Documents
D. 114-40054: Application Specification.
E. 501-60007: Qualification Test Report
DR
C. WANG
CHK
S. YAO
Tyco Electronics
AMP Shanghai Ltd
APP
I. ENOMOTO
NO
108-60034
REV LOC
O ES
20JUN
DIST O RELEASED FB00-0155-04 _{C.W 04}
LTR REVISION RECORD
DR DATE
PAGE
1 of 7
TITLE
AMP Connector, USB Consortium, Plug & Receptacle
Lead Free Version
ASHL-0004-ES REV A