108-60034 Datasheet, PDF (4/7 Pages) Tyco Electronics – AMP Connector, USB Consortium, Plug & Receptacle Lead Free Version

Para.
Test Items
3.5.9 Unmating Force
Requirements
10 N minimum
3.5.10 Cable Retention Force Cable shall not dislodge from
crimp
Procedures
AMP Spec 109-42
Condition A
Measure force necessary to unmate
samples at maximum rate of 12.5 mm per
minute.
AMP Spec 109-46
Apply axial load 25 N to cable
3.5.11 Durability
See Note
AMP Spec 109-27
Mate and unmate samples for 1500 cycles
at maximum rate of 200 cycles per hour
3.5.12 Solder ability
Solderable area shall have
minimum of 95%solder coverage
AMP Spec 109-11-1
Subject surface mount samples to Solder
ability.
3.5.13 Thermal Shock
AMP Spec 109-11-1
Subject through hole samples to Solder
ability.
Environmental Requirements
See Note
AMP Spec 109-22
Subject mated samples to 25 cycles
between -55 ^oC and +85 ^oC.
3.5.14 Temperature life
See Note
AMP Spec 109-43
Subject mated samples to temperature life
at 85 ^oC for 315 hours
3.5.15 Humidity-Temperature See Note
Cycling
AMP Spec 109-23-3
Condition B
Subject samples to 10 ,24 hours cycles
between 25 ^oC and 65 ^oC at 95% R.H.
3.5.16 Mixed flowing Gas
See Note
AMP Spec 109-85-2
Subject mated samples to Environmental
class ҈!for 14 days.
NOTE ^{Shall meet visual requirement, show no physical damage and shall meet requirement of additional tests}
as specified in Test Sequence in Figure 2.
Figure 1 (end)
ASHL-0005- ES REV A
Tyco Electronics
AMP Shanghai Ltd
PAGE NO
4
108-60034
REV LOC
O _ES