108-60034 Datasheet, PDF (2/7 Pages) Tyco Electronics – AMP Connector, USB Consortium, Plug & Receptacle Lead Free Version

3. Requirements:
3.1 Design and Construction:
Product shall be of the design, construction and physical dimensions specified on the applicable
product drawing.
3.2 Materials:
A. Contact:
(1) Plug: Copper alloy: gold over palladium nickel plating on contact area, tin plating on
solder area, all over nickel plating or gold plating on contact area, tin plating on
solder area, all over nickel plating
(2) Receptacle: Copper alloy: gold over palladium nickel plating on contact area, tin
plating on solder area, all over nickel plating or gold plating on contact
area, tin plating on solder area, all over nickel plating
B. Housing:
Ł Plug :
Thermoplastic, black, 130 °C, UL94V-0
ł Receptacle: Thermoplastic, black, 130 °C, UL94V-0
C. Shell:
Ł Plug:
Steel ,bright tin over copper
ł Receptacle: Copper alloy , bright tin
3.3 Ratings:
A. Voltage Rating
B. Current Rating
: 30 vac (rms)
: Signal application only,1 ampere maximum per contact
C. Temperature Rating:
-55°C to +85°C unless limited by cable or overmold
3.4 Performance Requirements and Test Descriptions:
The product shall be designed to meet the electrical, mechanical and environmental performance
requirements specified in Fig.1. Unless otherwise specified all tests shall be performed at ambient
environmental conditions per AMP Specification 109-1
ASHL-0005- ES REV A
Tyco Electronics
AMP Shanghai Ltd
PAGE NO
2
108-60034
REV LOC
O _ES