English
Language : 

BTM510 Datasheet, PDF (20/23 Pages) Vishay Siliconix – Metallized Polyester Film Capacitors MKT Radial Potted Type
BTM510/511 Multimedia Module
Datasheet
6 ORDERING INFORMATION
Part Number
BTM510
BTM511
DVK – BTM510
DVK – BTM511
Description
Bluetooth® Multimedia Module (external antenna)
Bluetooth® Multimedia Module with integrated antenna
Development Board with BTM510 soldered in place
Development Board with BTM511 soldered in place
6.1 General Comments
Refer to the schematic BTV-R-003.pdf for the Development Kit on the following two pages for examples of
typical pin connections. A PDF of the schematic can be downloaded from the product web page.
7 APPLICATION NOTE
7.1 Introduction
Laird Technologies surface mount modules are designed to conform to all major manufacturing guidelines. This
application note provides additional guidance beyond the information that is presented in the user’s manual.
This application note is a living document and is updated as new information is presented.
The modules are designed to meet the needs of many commercial and industrial applications. The modules are
designed to be easily manufactured and conform to current automated manufacturing processes.
7.2 Shipping
Modules are shipped in ESD (Electrostatic Discharge) safe trays that can be loaded into most manufacturers pick
and place machines. Layouts of the trays are provided in Figure 5.
R 0.050
Detail B
0.602
Detail A
0.602
0.202
0.707 0.813
0.804
1.010
0.176
Detail A
Pocket Wall Angles
92.0°
88.0°
Top and Bottom Radius r = 0.025"
Radius Acceptable (0.25" maximum)
Detail B
Pocket Corner Detail
R 0.50
Notes:
1) Material must be capable of
discharging an electro-static charge
(ESD), and symbol must be located
as shown.
2) Laird Part Number must be
embossed into the carrier at this
location.
3) Exterior edges may be modified to
allow for ‘stamping’ tray, as long as
outside maximum dimension is not
exceeded.
4) Dimensions:
All dimensions are in inches
(unless otherwise shown)
5) Tolerances:
x.xx +/- 0.010
x.xxx +/- 0.005
angles +/- 1 degree
(unless otherwise shown)
Reference Assemblies
5.250
0.156
0,0
0.313
Laird-5200-00021
2
+ 0.0
- 0.010
0,0
1.645
1.555
0.749 1.351
0.545
2.745
3.845
4.945
6.045
12.000
7.145
8.245
9.345
10.445
Figure 5: BTM510 and BTM511 shipping tray detail
0.143
BTM
510
0.551
0.787
BTM
1
0.143
511
0.551
0.984
3
Telematics - Lenexa
Title BTM510/11 Voice Shipping Tray
Dwg. No. 5200-00021
Rev 1
Drawn by drk Date 8-10-09 Sheet 1/1
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
20
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610