AMIS-30624 Datasheet, PDF (52/56 Pages) AMI SEMICONDUCTOR – I2C Microstepping Motordriver

AMIS-30624
17.0 Resistance to Electrical and Electromagnetic Disturbances
17.1 Electrostatic Discharges
Table 31: Absolute Maximum Ratings
Vesd ⁽¹⁾
Parameter
Electrostatic discharge voltage on all pins
Notes:
(1) Human body model (100pF via 1.5 kΩ, according to JEDEC EIA-JESD22-A114-B.)
Min.
Max.
Unit
-2
+2
kV
17.2 Electrical Transient Conduction Along Supply Lines
Test pulses are applied to the power supply wires of the equipment implementing the AMIS-30624 (see application schematic),
according to ISO 7637-1 document. Operating Classes are defined in ISO 7637-2.
Table 32: Test Pulses and Test Levels According to ISO 7637-1
Pulse
Amplitude
#1
-100V
#2a
+100V
#3a
-150V (from +13.5V)
#3b
+100V (from +13.5V)
#5b (load dump)
+21.5V (from +13.5V)
Rise Time
≤ 1µs
≤ 1µs
5ns
5ns
≤ 10ms
Pulse Duration
2ms
50µs
100ns (burst)
100ns (burst)
400ms
Rs
10Ω
2Ω
50Ω
50Ω
≤ 1Ω
Operating Class
C
B
A
A
C
17.3 EMC
Bulk current injection (BCI), according to ISO 11452-4. Operating Classes are defined in ISO 7637-2.
Table 33: Bulk Current Injection Operating Classes
Current
60mA envelope
100mA envelope
200mA envelope
Operating Class
A
B
C
17.4 Power Supply Micro-interruptions
According to ISO 16750-2
Table 34: Immunity to Power Supply Micro-interruptions
Test
10µs micro-interruptions
100µs micro-interruptions
5ms micro-interruptions
50ms micro-interruptions
300ms micro-interruptions
Operating Class
A
B
B
C
C
Rev. 4 | Page 52 of 56 | www.onsemi.com