LTC3831-1 Datasheet, PDF (19/20 Pages) Linear Technology – High Power Synchronous Switching Regulator Controller for DDR Memory Termination

PACKAGE DESCRIPTIO
GN Package
16-Lead Plastic SSOP (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1641)
LTC3831-1
.254 MIN
.045 ±.005
.150 – .165
.189 – .196*
(4.801 – 4.978)
16 15 14 13 12 11 10 9
.009
(0.229)
REF
.229 – .244
(5.817 – 6.198)
.150 – .157**
(3.810 – 3.988)
.0165 ± .0015
.0250 BSC
RECOMMENDED SOLDER PAD LAYOUT
.007 – .0098
(0.178 – 0.249)
.015 ± .004
(0.38 ± 0.10)
× 45°
0° – 8° TYP
1 234 5678
.0532 – .0688
(1.35 – 1.75)
.004 – .0098
(0.102 – 0.249)
.016 – .050
(0.406 – 1.270)
NOTE:
1. CONTROLLING DIMENSION: INCHES
2.
DIMENSIONS
ARE
IN
INCHES
(MILLIMETERS)
3. DRAWING NOT TO SCALE
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
.008 – .012
(0.203 – 0.305)
TYP
.0250
(0.635)
BSC
GN16 (SSOP) 0204
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
38311f
19