GM71C4403C Datasheet, PDF (3/10 Pages) LG Semicon Co.,Ltd. – 1,048,576 WORDS x 4BIT CMOS DYNAMIC RAM

LG Semicon
DC Electrical Characteristics (VCC = 5V+/-10%, TA = 0 ~ 70C)
GM71C4403C
Symbol
VOH
VOL
ICC1
ICC2
ICC3
ICC4
ICC5
ICC6
ICC8
II(L)
IO(L)
Parameter
Output Level
Output “H” Level Voltage (IOUT = -5mA)
Output Level
Output “L” Level Voltage (IOUT = 4.2mA)
Operating Current
Average Power Supply Operating Current
(RAS, CAS, Address Cycling: tRC = tRC min)
Standby Current (TTL)
Power Supply Standby Current
(RAS, CAS= VIH, DOUT = High-Z)
RAS-Only Refresh Current
Average Power Supply Current
RAS-Only Refresh Mode
(RAS Cycling, CAS = VIH, tRC = tRC min)
Extended Data Out Page Mode Current
Average Power Supply Current
Extended Data Out Mode
(RAS = VIL, CAS, Address Cycling: tHPC = tHPC min)
Standby Current (CMOS)
Power Supply Standby Current
(RAS, CAS= VIH, WE, OE, Address and DIN=VIH or VIL,
DOUT=High-Z)
CAS-before-RAS Refresh Current
(tRC = tRC min)
Standby Current RAS = VIH
CAS = VIL
DOUT = Enable
Input Leakage Current
Any Input (0V<=VIN<=7V)
Output Leakage Current
(DOUT is Disabled, 0V<=VOUT<=7V)
Min Max Unit Note
2.4 VCC V
0
60ns -
70ns -
80ns -
0.4 V
110
100 mA 1, 2
90
-
2 mA
60ns -
70ns -
80ns -
60ns -
70ns -
80ns -
110
100 mA 2
90
130
120 mA 1, 3
110
- 1 mA
60ns -
70ns -
80ns -
110
100 mA
90
-
5 mA 1
-10 10 uA
-10 10 uA
Note: 1. ICC depends on output load condition when the device is selected. ICC(max) is specified at the
output open condition.
2. Address can be changed once or less while RAS = VIL.
3. Address can be changed once or less while CAS = VIH.
3