80VA Datasheet, PDF (8/27 Pages) Lattice Semiconductor – In-System Programmable 3.3V Generic Digital CrosspointTM

Specifications ispGDX80VA
Absolute Maximum Ratings ^1,2
Supply Voltage V_cc ................................. -0.5 to +5.4V
Input Voltage Applied ............................... -0.5 to +5.6V
Off-State Output Voltage Applied ............ -0.5 to +5.6V
Storage Temperature ................................ -65 to 150°C
Case Temp. with Power Applied .............. -55 to 125°C
Max. Junction Temp. (T_J) with Power Applied ... 150°C
1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional
operation of the device at these or at any other conditions above those indicated in the operational sections of this specification
is not implied (while programming, follow the programming specifications).
2. Compliance with the Thermal Management section of the Lattice Semiconductor Data Book or CD-ROM is a requirement.
DC Recommended Operating Conditions
SYMBOL
VCC
VCCIO
PARAMETER
Supply Voltage
I/O Reference Voltage
Commercial
Industrial
T_A = 0°C to +70°C
T_A = -40°C to +85°C
Capacitance (T_A=25^oC, f=1.0 MHz)
MIN.
3.00
3.00
2.3
MAX. UNITS
3.60
V
3.60
V
3.60
V
Table 2-0005/gdxva
SYMBOL
C₁
C₂
PARAMETER
I/O Capacitance
Dedicated Clock Capacitance
PACKAGE TYPE
TQFP
TQFP
TYPICAL
7
8
UNITS
pf
pf
TEST CONDITIONS
V_CC = 3.3V, V_I/O = 2.0V
V_CC = 3.3V, V_Y= 2.0V
Table 2-0006/gdxva
Erase/Reprogram Specifications
PARAMETER
Erase/Reprogram Cycles
MINIMUM
10,000
MAXIMUM
—
UNITS
Cycles
8