E4417A Datasheet, PDF (9/19 Pages) Keysight Technologies – Power Meters and E-Series E9320 Peak and Average Power Sensors

09 | Keysight | E4416A/E4417A EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors – Data Sheet
Service Options
Warranty and calibration¹
R-50C-011-3
Keysight Calibration Upfront Plan 3-year coverage
R-50C-011-5
Keysight Calibration Upfront Plan 5-year coverage
R-51B-001-3C
1 year Return-to-Keysight warranty extended to 3 years
R-51B-001-5C
1 year Return-to-Keysight warranty extended to 5 years
The E9320 Series power sensors have a 12-month Return-to-Keysight warranty and
service plan. For more information, contact your local sales and service office.
E-Series E9320 Power Sensor Specifications
The E9320 peak and average power sensors are designed for use with the EPM-P series
power meters. The E9320 sensors have two measurement modes:
Normal mode
Average only mode
Default mode for E9320 sensors) for peak, average and time-related
measurements
Designed primarily for average power measurements on low-level signals.
This mode is the only mode used with 8480 and N8480 series sensors,
E-series CW sensors and E-series E9300 sensors.
The following specifications are valid after zero and calibration of the power meter.
Note: E9320 power sensors MUST be used with an E9288A, B or C cable.
Table 3. Sensor specification
Sensor model Video bandwidth
Frequency range
E9321A
E9325A
E9322A
E9326A
E9323A
E9327A
300 kHz
1.5 MHz
5 MHz
50 MHz to 6 GHz
50 MHz to 18 GHz
50 MHz to 6 GHz
50 MHz to 18 GHz
50 MHz to 6 GHz
50 MHz to 18 GHz
Power range
Average only mode Normal mode²
–65 dBm to +20 dBm –50 dBm to +20 dBm
–60 dBm to +20 dBm –45 dBm to +20 dBm
Maximum power Connector type
+23 dBm average; Type N (m)
+30 dBm peak
(< 10 µsec duration)
–60 dBm to +20 dBm –40 dBm to +20 dBm
1.  Options not available in all countries.
2.  For average power measurements, free run acquisition.