4000 Datasheet, PDF (9/37 Pages) C&D Technologies – Toroidal Surface Mount Inductors

9 | Keysight | InfiniiVision 4000 X-Series Oscilloscopes - Data Sheet
Oscilloscope Experience Redefined:
Experience the Usability (Continued)
InfiniiScan Zone touch trigger
One of the biggest challenges of using an oscilloscope is setting
up an advanced trigger to isolate a signal of interest. While
advanced triggers are powerful features, InfiniiScan Zone touch
trigger provides a turnkey trigger solution.
You simply observe the signal of interest on the display, and
draw a zone (box) around it. What used to be hours of work can
now take just a few seconds. If you want to move your zones to
another location, just drag them over. The 4000 X-Series can be
set up to easily trigger on one or two zone boxes simultaneously
with either must intersect or must not intersect conditions.
InfiniiScan Zone triggering does not compromise the waveform
update rate; the 4000 X-Series will still maintain an ultra-fast
200,000 waveforms per second or more, even with additional
features turned on. In other words, the oscilloscope that sees
everything can easily trigger on anything.
InfiniiScan Zone touch trigger + segment memory:
a whole new experience
The combination of the industry’s only hardware-based
InfiniiScan Zone touch trigger with the 4000 X-Series’ segment
memory simplifies and enhances your debugging experience.
In Figure 16, the 4000 X-Series has isolated and captured
1,000 metastable signals, showing the critical bit errors over a
32-second time span at 5 GS/s sampling rate in the segment
memory. The segment memory also allows you to overlay all
segments to identify the worst-case signal.
Figure 15. When you see anomalies, all you have to do is
draw a zone box to trigger on them.
Figure 16. Combination of the InfiniiScan Zone touch trigger
and segmented memory.