4000 Datasheet, PDF (31/37 Pages) C&D Technologies – Toroidal Surface Mount Inductors

31 | Keysight | InfiniiVision 4000 X-Series Oscilloscopes - Data Sheet
Oscilloscope Experience Redefined:
InfiniiVision 4000 X-Series Performance Characteristics (Continued)
Dual channel WaveGen - built-in function/arbitary waveform generator
DC offset
Range
Main output
Trigger output
Resolution
Accuracy (waveform modes)
Accuracy (DC mode)
Impedance
Isolation
Protection
Trigger output available on trig-out BNC
± 5 V into Hi-Z, except ± 4 V if sine wave, ± 2.5 V if sinc, cardiac, or
Gaussian pulse into Hi-Z
± 2.5 V into Hi-Z, except ± 2 V if sine wave, ± 1.25 V if sinc, cardiac, or
Gaussian pulse into 50 Ω
Larger of 250 uV or 3 digits
± 1.5% of offset setting ± 1% of amplitude ± 1 mV
± 1.5% of offset setting ± 3 mV
50 Ω typical
Not available, main output BNC is grounded
Overload automatically disables output
Digital voltmeter (specifications are typical)
Source
Analog channels only (1-4)
Functions
ACrms, DC, DCrms, frequency
Resolution
ACV/DCV: 3 digits
Counter frequency: 5.5 digits
Measuring rate
100 times/second
Autoranging
Automatic adjustment of vertical amplification to maximize the dynamic range of measurements
Range meter
Graphical display of most recent measurement, plus extrema over the previous 3 seconds
General and environmental characteristics
Power line consumption
Power voltage range
Temperature
Operating
Non-operating
Humidity
Operating
Non-operating
Altitude
Operating
Non-operating
Electromagnetic compatibility
Safety
Vibration
Maximum 120 W
100 to 120 V, 50/60/400 Hz; 100 to 240 V, 50/60 Hz ± 10% auto ranging
0 to +50 °C
–30 to +70 °C
50% to 95% RH at 40 °C for 5 days
90% RH at 65 °C for 24 hr
Up to 3,000 m
Up to 15,300 m
Meets EMC Directive (2004/108/EC), meets or exceeds IEC 61326-1:2005/EN
61326-1:2006 Group 1 Class A requirement
CISPR 11/EN 55011
IEC 61000-4-2/EN 61000-4-2
IEC 61000-4-3/EN 61000-4-3
IEC 61000-4-4/EN 61000-4-4
IEC 61000-4-5/EN 61000-4-5
IEC 61000-4-6/EN 61000-4-6
IEC 61000-4-11/EN 61000-4-11
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS
UL61010-1 2nd edition, CAN/CSA22.2 No. 61010-1-04
Meets IEC60068-2-6 and MIL-PRF-28800; class 3 random