5989-8853EN Datasheet, PDF (35/37 Pages) Keysight Technologies – A guide to power product solutions to match your test and measurement needs

35 | Keysight | Power Products – October 2015 - Selection Guide
NEW PA2201A IntegraVision Power Analyzer
See it, measure it, prove it
The Keysight IntegraVision power analyzer
is an intuitive combination of accurate
power measurements and touch-driven
oscilloscope visualization. Within a single
instrument, it delivers the dynamic views
you need to see, measure and prove the
performance of your design.
Make all of your critical
power measurements
with one instrument
– Achieve power analyzer accuracies
and scope-like waveform visualization
with reduced setup time
– Address multiple test scenarios
with the lexibility of wide-ranging,
isolated inputs
– Visualize transients, in-rush currents
and state changes with a high-speed
digitizer that captures voltage,
current and power in real-time
– Analyze voltage, current and power in
the time and frequency domains
– Explore you design and gain new
insights through the 12.1”/310 mm
high-resolution display with touch
interface
– Save space on your bench with
minimum-depth form factor
Function
Description
Basic power accuracy (50/60 Hz)
0.05% of reading + 0.05% of range
Power Channels (Voltage and Current)
2
Voltage Measurement Bandwidth (-3 dB)
2.5 MHz (-3 dB)
Current Measurement Bandwidth (2 A or 50 A Input) 100 kHz (-3 dB)
Current Measurement Bandwidth (External Input) 2.5 MHz (-3 dB)
Maximum Voltage
1000 Vrms (2000 V peak)
Maximum Current
Direct input: 2 Arms (6 A peak) or 50 Arms
(100 A peak)
External transducer: 10 Vrms (30 V peak)
Record Size
Maximum 1.5 M points on each waveform
simultaneously
Digitizing Speed
Maximum 5 M samples/second at 16 bits on
each waveform simultaneously
Display size and type
12.1- inch capacitive multi-touch/gesture
enabled display