5989-8853EN Datasheet, PDF (33/37 Pages) Keysight Technologies – A guide to power product solutions to match your test and measurement needs

33 | Keysight | Power Products – October 2015 - Selection Guide
E4360 Modular Solar Array Simulation
The modular solar array simulator
(SAS) is a DC power source that
simulates the output characteristics
of a solar array. The SAS is primarily
a current source with very low output
capacitance. It is capable of
simulating the I-V curve of different
arrays under different environmental
conditions (temperature, age, etc.).
You can set the I-V curve from the
front panel or program it over GPIB,
LAN (LXI Core) or USB.
– Accurate simulation of any type
of solar array
– Small size: up to 2 outputs in
2U of rack space
– High output power—up to
600 W per output
– Fast I-V curve changes to simulate
eclipse or spin
– 14360A System Control Tools
software included to simplify
control of multiple
solar array simulators in a system
– Custom turn-key system or
individual instruments available
E4360A modules
E4360A
SAS mainframe
E4360 modular solar array simulator mainframes
Model
Power,
W
Modules
Max # of
modules
E4360A
1200
Choose from
E4361A and E4362A
2
E4367A 1200
Pre-conigured
with 2x E4361A
2
E4368A 1200
Pre-conigured
with 2x E4362A
2
Physical size*
Full RU w x 2 RU h
Full RU w x 1 RU h
Full RU w x 1 RU h
E4360 modules
Model
Power, Max
W
Voc
E4361A
510
65
Max
Isc
Number
of
outputs
Ripple and noise
mVp-p
8.5
1
125
Programming
accuracy
% + mV
0.075 + 10
E4362A
600 130
5
1
195
0.075 + 20
* NOTE: RU refers to rack unit of a standard 19” EIA equipment rack. The width is either 1/2 or full.
The height is in number of rack units which are 1.75” (44.4 mm) each.
For example: a 3 RU h has a height of 5.25” (133.3 mm)