5989-8853EN Datasheet, PDF (21/37 Pages) Keysight Technologies – A guide to power product solutions to match your test and measurement needs

21 | Keysight | Power Products – October 2015 - Selection Guide
N3300 and 6060 Series DC Electronic Loads
Programmable loads with measurements
The N3300 and 6060 Series DC electronic
loads give you lexibility for testing power
supplies and other devices requiring a
load. The built-in measurement system
provides both accuracy and convenience
and eliminates the need for a DMM,
external shunts and wiring.
The N3300 multiple-input models are
fast, accurate, and ideal for high-volume
manufacturing, while single input 6060
models are ideal for evaluation of DC
power sources and power components on
your bench.
N3300 Multiple Input
Electronic Loads
– Increase test throughput with short
command processing time and stored
command sequences
– Test multiple power supply
outputs with up to 6 modules with 150
W to 600 W capability
– Operate in constant current, con-
stant voltage, or constant resistance
modes
– Measure voltage and current simulta-
neously
– Use in parallel for greater current
sinking capability
– Computer control with GPIB
6060 Single Input
Electronic Loads
– Cost effective load for single input
applications
– Ideal for bench applications, provides
optional front panel connection
– Computer control via GPIB
N3300 mainframes
Model
N3300A
N3301A
Max #
modules
6
2
Physical size*
Full RU w x 4 RU h
½ RU w x 4 RU h
N3300 modules
N3300A
Model
N3302A 150 60 30 0.1 + 10 0.1 + 8 0.05 + 6 0.05 + 8
1
N3303A 250 240 10 0.1 + 7.5 0.1 + 40 0.05 + 5 0.05 + 20 1
N3304A 300 60 60 0.1 + 15 0.1 + 8 0.05 + 10 0.05 + 8
1
N3305A 500 150 60 0.1 + 15 0.1 + 20 0.05 + 10 0.05 + 16 2
N3306A 600 60 120 0.1 + 37.5 0.1 + 8 0.05 + 20 0.05 + 8
2
N3307A 250 150 30 0.1 + 15 0.1 + 20 0.05 + 6 0.05 + 16 1
6060 loads
Model
6060B 300 60 60
6063B 250 240 10
0.1 + 75 0.1 + 50 0.05 + 65 0.05 + 45
0.15 + 10 0.12 + 120 0.12 + 10 0.1 + 150
Size*
Full RU w
x 4 RU h
* NOTE: RU refers to rack unit of a standard 19” EIA equipment rack. The width is either 1/2 or
full. The height is in number of rack units which are 1.75” (44.4 mm) each. For example: a 3 RU h
has a height of 5.25” (133.3 mm)