E4980A-1CM Datasheet, PDF (3/38 Pages) Keysight Technologies – Precision LCR Meter

03 | Keysight | E4980A Precision LCR Meter 20 Hz to 2 MHz, E4980AL Precision LCR Meter 20 Hz to 300 kHz/500 kHz/1 MHz – Data Sheet
Basic Specifications
Measurement functions
Measurement parameters
–– Cp-D, Cp-Q, Cp-G, Cp-Rp
–– Cs-D, Cs-Q, Cs-Rs
–– Lp-D, Lp-Q, Lp-G, Lp-Rp, Lp-Rdc
–– Ls-D, Ls-Q, Ls-Rs, Ls-Rdc
–– R-X
–– Z-θd, Z-θr
–– G-B
–– Y-θd, Y-θr
–– Vdc-Idc¹
Definitions
Cp Capacitance value measured with parallel-equivalent circuit model
Cs Capacitance value measured with series-equivalent circuit model
Lp Inductance value measured with parallel-equivalent circuit model
Ls Inductance value measured with series-equivalent circuit model
D Dissipation factor
Q Quality factor (inverse of D)
G Equivalent parallel conductance measured with parallel-equivalent circuit model
Rp Equivalent parallel resistance measured with parallel-equivalent circuit model
Rs Equivalent series resistance measured with series-equivalent circuit model
Rdc Direct-current resistance
R Resistance
X Reactance
Z Impedance
Y Admittance
qd Phase angle of impedance/admittance (degree)
qr Phase angle of impedance/admittance (radian)
B Susceptance
Vdc Direct-current voltage
Idc Direct-current electricity
Deviation measurement function: Deviation from reference value and percentage of
deviation from reference value can be output as the result.
Equivalent circuits for measurement: Parallel, Series
Impedance range selection: Auto (auto range mode), manual (hold range mode)
Trigger mode: Internal trigger (INT), manual trigger (MAN), external trigger (EXT),
GPIB trigger (BUS)
1.  E4980A-001 is required.