3000T Datasheet, PDF (29/40 Pages) Keysight Technologies – InfiniiVision 3000T X-Series Oscilloscopes

29 | Keysight | InfiniiVision 3000T X-Series Oscilloscopes - Data Sheet
Performance Characteristics (Continued)
3000T X-Series specification overview
3012T 3014T 3022T
3024T 3032T 3034T 3052T 3054T
3102T 3104A
Time base range
5 ns/div to 50 s/div
2 ns/div to 50 s/div
1 ns/div to 50 s/div 500 ps/div to 50 s/div
Time base accuracy ¹
± 1.6 ppm + aging factor (1st year: ± 0.5 ppm, 2nd year: ± 0.7 ppm, 5 years: ± 1.5 ppm, 10 years: ± 2.0 ppm)
Time base delay
Pre-trigger Greater of 1 screen width or 250 μs
time range
Post-trigger 1 s to 500 s
Channel-to-channel deskew range ± 100 ns
Δ Time accuracy (using cursors) ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps
Modes
Main, zoom, roll, XY
XY
On channels 1 and 2 only. Z Blanking on Ext Trigger Input, 1.4 V threshold
Bandwidth: Maximum bandwidth. Phase error at 1 MHz: < 0.5 degree
Horizontal system digital channels
Minimum detectable pulse width 5 ns
Channel-to-channel skew
2 ns (typical); 3 ns (maximum)
Acquisition system
Maximum analog channels sample 5 GSa/s half channel interleaved, 2.5 GSa/s all channel
rate
Maximum analog channels record 4 Mpts half channel interleaved, 2 Mpts all channel
length
Maximum digital channels sample 1.25 GSa/s all pods
rate
Maximum digital channels record 2 Mpts (with digital channels only)
length
Acquisition mode Normal
Default mode
Peak detect Capture glitches as narrow as 250 ps at all time base settings
Averaging Selectable from 2, 4, 8, 16, 64, ... to 65,536
High
Real time boxcar averaging reduces random noise and effectively increases vertical resolution 12 bits of resolution
resolution when ≥ 10 μs/div at 5 GSa/s or ≥ 20‑μs/div at 2.5 GSa/s
Segmented Segmented memory optimizes available memory for data streams that have long dead times between activity.
Maximum segments = 1000. Re-arm time = 1 μs (minimum time between trigger events)
Time mode
Normal
Default mode
Roll
Displays the waveform moving across the screen from right to left. Available at the time base 50 ms/div or slower
XY
Displays the volts-versus-volts display. Time base can be set from 200 ns/div to 50 ms/div
1.  Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 °C from firmware calibration
temperature.