3000T Datasheet, PDF (12/40 Pages) Keysight Technologies – InfiniiVision 3000T X-Series Oscilloscopes

12 | Keysight | InfiniiVision 3000T X-Series Oscilloscopes - Data Sheet
Solve: Integrated Hardware-Based Serial Decoding and Triggering (Option) Makes
Easy Work of Low Speed Serial Buses
Keysight InfiniiVision oscilloscopes, including the new 3000T X-Series, use hardware-
based serial protocol decoding. Some other vendors use software post-processing
techniques to decode serial packets ⁄ frames, and therefore have slow waveform and
decode capture rates and could miss critical events and errors due to a long dead-time.
Faster decoding with hardware-based technology enhances the probability of capturing
infrequent serial communication errors.
After capturing serial bus communication, you can easily perform a search operation
based on specific criteria and then quickly navigate to bytes/frames of serial data
that satisfy that search criteria. The 3000T X-Series can decode two serial buses
simultaneously using hardware based decoding, and display the captured data in a time
interleaved “lister” display.
Serial protocol decoding can be used simultaneously with segmented memory and Zone
touch triggering. The 3000T X-Series has the most decode/trigger options in this class
of instrument including: I²C, SPI, RS232/422/485/UART, CAN, CAN-FD (CAN-FD ISO),
CAN-dbc, LIN, LIN symbolic, SENT, CXPI, FlexRay, MIL-STD 1553, ARINC 429, and I²S.
SERIAL DECODE AND
TRIGGER OPTIONS
The 3000T X-Series supports a
range of different serial decode and
trigger options including:
–– I²C
–– SPI (2/3/4 wire)
–– RS232/422/485/UART
–– CAN
–– CAN-dbc
–– CAN-FD (CAN-FD ISO)
–– LIN
–– LIN symbolic
–– SENT
–– CXPI
–– FlexRay
–– MIL-STD 1553
–– ARINC 429
–– I²S
Figure 15. I²C decode and
trigger.
Figure 16. RS232 decode
and trigger.
Figure 17. CAN-FD decode
and trigger.
Figure 18. SPI 4wire
decode and trigger.
Figure 19. Multi-bus time
aligned decode.