E2666B Datasheet, PDF (18/26 Pages) Keysight Technologies – X-Series Oscilloscopes

18 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
Specifications/Characteristics (Continued)
FlexRay specifications/characteristics (DSOX3FLEX, DSOX4FLEX and DSOX6FLEX)
FlexRay input source
Channel 1, 2, 3, or 4 (using differential probe)
FlexRay channels
A or B
Baud rates
2.5 Mbps, 5.0 Mbps, and 10 Mbps
Frame triggering
Frame type: Startup (SUP), not startup (~SUP), sync (SYNC), not sync (~SYNC), null (NULL), not null
(~NULL), normal (NORM), and All
Frame ID: 1 to 2047 (decimal format), and All
Cycle -
Base: 0 to 63 (decimal format), and All
Repetition: 1, 2, 4, 8, 16, 32, 64 (decimal format), and All
Error triggering
All errors
Header CRC error
Frame CRC error
Event triggering
Wake-up
TSS (transmission start sequence)
BSS (byte start sequence)
FES/DTS (frame end or dynamic trailing sequence)
Frame decoding
Frame type (NORM, SYNC, SUP, NULL in blue)
Frame ID (decimal digits in yellow)
Payload-length (decimal number of words in green)
Header CRC (hex digits in blue if valid, or red digits if invalid)
Cycle number (decimal digits in yellow)
Data bytes (HEX digits in white)
Frame CRC (hex digits in blue if valid, or red digits
Totalize function
Total frames
Total synchronization frames
Total null frames
Eye-diagram mask testing (requires
TP1 standard voltage (10 Mbps only)
DSOX3MASK mask test option plus
TP1 increased voltage (10 Mbps only)
downloadable mask files)
TP11 standard voltage (10 Mbps only)
TP11 increased voltage (10 Mbps only)
TP4 10 Mbps, TP4 5 Mbps and TP4 2.5 Mbps
Multi-bus analysis
FlexRay plus one other serial bus (including another FlexRay bus)