E2666B Datasheet, PDF (10/26 Pages) Keysight Technologies – X-Series Oscilloscopes

10 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
Specifications/Characteristics (Continued)
RS232/UART specifications/characteristics (DSOX2COMP, DSOX3COMP, DSOX4COMP and DSOX6COMP)
Tx and Rx input source
Analog channels 1, 2, 3, or 4
Digital channels D0 to D15 (3000, 4000 and 6000 X-Series only)
Bus configuration
–– Baud rates
100 b/s up to 8 Mb/s
–– Number of bits
5 to 9
–– Parity
None, odd, or even
–– Polarity
Idle low or idle high
–– Bit order
LSB out first or MSB out first
Triggering
Rx start bit
Rx stop bit
Rx data
Rx 1:data (9-bit format)
Rx 0:data (9-bit format)
Rx X:data (9-bit format)
Rx or Tx parity error
Tx start bit
Tx stop bit
Tx data
Tx 1:data (9-bit format)
Tx 0:data (9-bit format)
Tx X:data (9-bit format)
Burst (nth frame within burst defined by timeout)
Hardware-based decode
–– Number of decode traces
2 independent traces (Tx and Rx)
–– Data format
Binary, hex, or ASCII-code characters
–– Data byte display
White characters if no parity error, red characters if parity or bus error
–– Idle bus trace
Mid-level bus trace in blue
–– Active bus trace
Bi-level trace in blue
Multi-bus analysis
RS232/UART plus one other serial bus, including another RS232/UART bus. (3000, 4000 and 6000 X-Series
only)
Totalize/counter function
Total received frames
Total transmitted frames
Total parity error frames (with percentage)