E2666B Datasheet, PDF (15/26 Pages) Keysight Technologies – X-Series Oscilloscopes

15 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
Specifications/Characteristics (Continued)
LIN specifications/characteristics (DSOX2AUTO, DSOX3AUTO, DSOXT3AUTO, DSOX4AUTO and DSOX6AUTO)
LIN input source
Analog channels 1, 2, 3, or 4
Digital channels D0 to D15 except 2000 X-Series
LIN standards
LIN 1.3 or LIN 2.X
Baud rates
2400 b/s to 625 kb/s
Triggering
Sync break
Frame ID (0X00HEX to 0X3FHEX)
Frame ID and data
Parity error
Checksum error
Symbolic decode (except 2000X)(based on Message names (alpha-numeric characters in yellow)
.ldf file)
Signal names, value/encoded state and units (alpha-numeric characters in white)
Hardware-based decode
Frame ID (6-bit hex digits in yellow)
Frame ID and optional parity bits (8-bit hex digits in yellow if valid, red if parity bit error)
Data bytes (hex digits in white)
Check sum (hex digits in blue = valid, hex digits in red = error)
Sync error (“SYNC” in red)
THeader-max (“THM” in red)
TFrame-max (“TFM” in red)
Parity error (“PAR” in red)
LIN 1.3 wake-up error (“WUP” in red)
Idle bus (mid-level bus trace in dark blue)
Active bus (bi-level bus trace in dark blue)
Symbolic triggering (except 2000X) (based on Message names
.dbc file)
Message and signal values/encoded states
Multi-bus analysis
LIN plus one other serial bus, including another LIN bus. (except 2000X)