E2666B Datasheet, PDF (17/26 Pages) Keysight Technologies – X-Series Oscilloscopes

17 | Keysight | Serial Bus Options for InfiniiVision X-Series Oscilloscopes - Data Sheet
Specifications/Characteristics (Continued)
CXPI specifications/characteristics (DSOXT3CXPI and DSOX4CXPI)
CXPI input source
Analog channels 1, 2, 3 or 4
Baud rates
9.6 kb/s to 40 kb/s (20 kb/s typical) with tolerance setting
Triggering
SOF (Start-of-frame)
EOF (End-of-frame)
PTYPE
Frame ID (PTPYE present or not present)
Frame ID + info + data
Frame ID + info + data (long frame)
CRC field error (filtered by ID)
Parity error
Inter-byte space error (filtered by ID)
Inter-frame space error (filtered by ID)
Framing error (filtered by ID)
Data length error (filtered by ID)
Sample error
All errors
Sleep frame
Wakeup pulse
Hardware-based decode
Frame ID (hex digits in yellow if valid or red if parity error)
Data length code (DLC = with decimal digits in blue)
Network management (NM) bits (binary digits in green)
Counter (CT) bits (binary digits in yellow)
Data (hex digits in white)
CRC (hex digits in blue = valid, hex digits in red = error)
Idle bus (mid-level dark blue bus trace)
Active bus (bi-level dark blue bus trace with embedded decode within)
Inter-byte space error (IBS ERR in red)
Data length error (LEN ERR in red)
Sleep mode (SLEEP MODE in orange within bi-level orange bus trace)
Wakeup pulse (WAKEUP PULSE in blue with bi-level blue bus trace)
Multi-bus analysis
CXPI plus one other serial bus