E5072A Datasheet, PDF (16/23 Pages) Keysight Technologies – E5072A ENA Series Network Analyzer

16 | Keysight | E5072A ENA Series Network Analyze 30 kHz to 4.5/8.5 GHz - Data Sheet
Rear Panel
Description
Internal reference signal output connector
Type
Output frequency
Signal Type
Output level
Output Impedance
Internal reference signal oven connector
(Option 1E5)
Type
Output frequency
Output level
Bias tee input connector
Type
Damage level
No RF spec degradation level
Over current protection
Video output
GPIB
Typical
10 MHz ± 7 ppm
Sinewave
0 dBm ± 3 dB into 50 Ω
10 MHz ± 1 ppm
0 dBm minimum
± 35 V, 1A DC
300 mA
1A (Circuit Breaker)
USB host port
USB (USBTMC ¹) interface port
LAN
Handler I/O port
Line Power ²
Frequency
Voltage
VA max
Power consumption
General characteristic
BNC, female
50 Ω
BNC, female
BNC, female
15-pin mini D-Sub; female; drives XGA compatible monitors
24-pin D-Sub (Type D-24), female; compatible with
IEEE-488
Universal serial bus jack, Type A configuration; female; provides connection
to mouse, key board, printer, ECal module, USB power sensor, or USB/GPIB
interface
Universal serial bus jack, Type B configuration (4 contacts
inline); female; provides connection to an external PC; compatible with
USBTMC-USB488 and USB 2.0.LA
10/100BaseT Ethernet, 8-pin configuration; auto selects between the two
data rates
36-pin centronics, female; provides connection to handler system
47 Hz to 63 Hz
90-264 VAC (Vpeak ≥ 120V)
350 VA max.
135 W (SPD)
Rear panel
Description
AUX input connector
Type
Input Range
Accuracy
Specification
General characteristic
1% + 1 mV for ± 1 V input
1% + 10 mV for ± 10 V input
BNC, female
± 1 V or ± 10 V selectable
1.  USB Test and Measurement Class (TMC) interface that communicates over USB, complying with the IEEE 488.1 and IEEE 488.2 standards.
2.  A third-wire ground is required.