JANSF2N7422U Datasheet, PDF (2/8 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET SURFACE MOUNT

IRHN9150, JANSR2N7422U
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
BVDSS
∆BVDSS/∆TJ
RDS(on)
VGS(th)
gfs
IDSS
Parameter
Drain-to-Source Breakdown Voltage
Temperature Coefficient of Breakdown
Voltage
Static Drain-to-Source On-State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Qgs
Qgd
td_(on)
tr
td_(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Min Typ Max Units
-100 — —
V
— -0.093 — V/°C
Test Conditions
VGS = 0V, ID =-1.0mA
Reference to 25°C, ID = -1.0mA
— — 0.080
— — 0.085 ^Ω
-2.0 — -4.0 V
11 — — S ( )
—
—
—
—
-25
-250
µA
— — -100
—
— 100 ^nA
— — 200
— — 35 nC
— — 48
VGS = -12V, ID = -14A➃
VGS = -12V, ID = -22A➃
VDS = VGS, ID = -1.0mA
VDS >-15V, IDS = -14A ➃
VDS= -80V ,VGS=0V
VDS = -80V,
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS =-12V, ID = -22A
VDS = -50V
— — 40
— — 170
—
— 190 ^ns
VDD = -50V, ID = -22A,
VGS =-12V, RG = 2.35Ω
— — 190
— 4.0 — _{nH Measured from the center of}
drain pad to center of source pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 4300 —
— 1100 — pF
— 310 —
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
— — -22 _A
— — -88
Test Conditions
VSD
trr
QRR
ton
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
— — -3.0 V
Tj = 25°C, IS = -22A, VGS = 0V ➃
— — 300 nS Tj = 25°C, IF = -22A, di/dt ≤ -100A/µs
— — 1.5 µC
VDD ≤ -50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction-to-Case
Junction-to-PC board
Min Typ Max Units
Test Conditions
— — 0.83
°C/W
— 6.6 —
soldered to a 1”sq. copper-clad board
Note: Corresponding Spice and Saber models are available on International Rectifier Web site.
For footnotes refer to the last page
2
www.irf.com