ISL6505 Datasheet, PDF (5/17 Pages) Intersil Corporation – Multiple Linear Power Controller with ACPI Control Interface

ISL6505
Electrical Specifications Recommended Operating Conditions, Unless Otherwise Noted Refer to Figures 1, 2 and 3 (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNITS
1.2V_VID LINEAR REGULATOR (V_OUT2)
1V2VID Regulation
-
-
2.0
%
1V2VID Nominal Voltage Level
1V2VID Undervoltage Rising Threshold
V_1V2VID
-
1.2
-
V
- 0.92 -
V
1V2VID Undervoltage Hysteresis
-
100
-
mV
1V2VID Output Current
I_1V2VID
3.3V_DUAL/3.3V_SB LINEAR REGULATOR (V_OUT3)
3V3DL Sleep State Regulation
V_3V3 = 3.3V
-
-
180
mA
-
-
2.0
%
3V3DL Nominal Voltage Level
3V3DL Undervoltage Rising Threshold
V_3V3DL
-
3.3
-
V
- 2.62 -
V
3V3DL Undervoltage Hysteresis
-
150
-
mV
3V3DLSB Output Drive Current
5V_DUAL SWITCH CONTROLLER (V_OUT4)
5VDL Undervoltage Rising Threshold
I_3V3DLSB V_5VSB = 5V
30 50
-
mA
- 4.10 -
V
5VDL Undervoltage Hysteresis
-
120
-
mV
5VDLSB Output Drive Current
TIMING INTERVALS
I_5VDLSB V_5VDLSB = 4V_, V_5VSB = 5V
-20
-
-40
mA
Active State Assessment Past Input UV
Thresholds (Note 5)
42
53
64
ms
Active-to-Sleep Control Input Delay
-
200
-
µs
Falling UV Threshold Timeout (All Monitors)
-
10
-
µs
CONTROL I/O (S3, S5, EN5, LAN, FAULT)
High Level Input Threshold
S3, S5, EN5, LAN
-
-
2.2
V
Low Level Input Threshold
S3, S5, EN5, LAN
0.8
-
-
V
Internal Pull-up Current to 5VSB
S3, S5 to GND
-
50
-
µA
Internal Pull-up Current to 5VSB
EN5, LAN to GND
-
10
-
µA
Input Leakage Current to 5VSB
EN5, LAN to 5VSB
-
-
10
mA
FAULT Current IOH (to 5VSB)
FAULT = 4.6V, 5VSB = 5V
-
-7.5
-
mA
FAULT Current IOL (to GND)
FAULT = 0.4V, 5VSB = 5V
- 0.75 -
mA
TEMPERATURE MONITOR
Fault-Level Threshold (Note 6)
Shutdown-Level Threshold (Note 6)
125
-
-
o_C
-
155
-
o_C
NOTES:
5. Guaranteed by Correlation.
6. Guaranteed by Design.
5