ISL62882_14 Datasheet, PDF (40/42 Pages) Intersil Corporation – Multiphase PWM Regulator for IMVP-6.5™ Mobile CPUs and GPUs

ISL62882, ISL62882B
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
REVISION
CHANGE
5/6/11
FN6890.4
Updated to most current Intersil template.
Page 8, Electrical Spec table: Added min and max limits for IMON Output Current, Condition ISUM – pin current = 5µA, Min: 22
Max: 37.5
Page 8, Note 6: Updated over temp note in Min Max column of spec tables from "Compliance to datasheet limits is assured by
one or more methods: production test, characterization and/or design." To: "Parameters with MIN and/or MAX limits are 100%
tested at +25°C, unless otherwise specified. Temperature limits established by characterization and are not production tested."
2/10/11
FN6890.3
Page 7, Electrical Spec table: removed min and max limits for IMON Output Current, Condition ISUM – pin current = 5µA
Pg 2 - Updated Tape & Reel note in Ordering Information from "Add “-T” suffix for tape and reel." to new standard "Add “-T*” suffix
for tape and reel." The "*" covers all possible tape and reel options.
Removed -T FGs that are covered by "-T*" note (IRTZ-T, HRTZ-T, BHRTZ-T)
Updated Intersil Trademark statement at bottom of page 1 per directive from Legal.
Updated over temp note in Min Max column of spec tables from "Parameters with MIN and/or MAX limits are 100% tested at
+25°C, unless otherwise specified. Temperature limits established by characterization and are not production tested." to new
standard "Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design."
Electrical Spec table: Removed Note 7 "Limits established by characterization and are not production tested." and references to
it in the table.
Updated L40.5x5 POD to rev .1. Changes from rev 0:
Added Note 7 (JEDEC reference drawing: MO-220WHHE-1)
Added Note 4 callout to Dimension b in bottom view
12/3/09 FN6890.2 Removed ISL62882A device from data sheet.
11/4/09
FN6890.2
Converted to new Intersil template. On page 19, Modes of Operation section last paragraph Changed from "Rbias =
147kohm enables the overshoot reduction function and Rbias = 47kohm disables it" to "Rbias = 147kohm disables the
overshoot reduction function and Rbias = 47kohm enables it". Applied Intersil Standards as follows: Ordering information
with notes and links, Added bold verbiage to Electrical spec conditions for over-temp and bolded min and max value
columns. Pin Descriptions placed in Table.
8/24/09
FN6890.1
8/18/09 - See attached .doc file for changes.
7/10/09: Updated Figures 1, 2, 10, 11 and 27. Per Jia, “All the drawings have updated the way ISEN capacitors are
connected. They used to be connected to from ISEN to GND, now they are connected from ISEN to Vo. It’s an application
patch that helps to avoid false IBAL fault during phase dropping due to an IC design error.”
Changed “GND” to “VSUM-“ for pins 10 and 11 in table 5. Pin 10 now reads “A capacitor (C9) decouples it to VSUM-. Place
it in general proximity of the controller.” Pin 11 now reads “A capacitor (C10) decouples it to VSUM-. Place it in general
proximity of the controller.”
5/19/09: Changed under Recommended Operating Conditions- Battery Voltage VIN from "+5V to 21V" to "+5V to 25V"
04/01/09 FN6890.0 Initial Release to web
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products
address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks.
Intersil's product families address power management and analog signal processing functions. Go to www.intersil.com/products for a
complete list of Intersil product families.
*For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page
on intersil.com: ISL62882, ISL62882B
To report errors or suggestions for this datasheet, please go to www.intersil.com/askourstaff
FITs are available from our website at http://rel.intersil.com/reports/search.php
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
40
FN6890.4
June 21, 2011