ISL59450 Datasheet, PDF (37/37 Pages) Intersil Corporation – Multiformat Video Crosspoint with Integrated Sync Separator

ISL59450
Metric Plastic Quad Flatpack Packages (MQFP)
D
D1
128
PIN 1 ID
1
E1 _E
C0.600x0.350
(4X)
12.500 REF
13.870 ±0.100
A
A
14.000 ±0.100
1
(D1)
12° ALL
AROUND
Y
b
T1
T
b1
1 SECTION A-A
DROP IN HEAT SPREADER
4 STAND POINTS MAY BE EXPOSED
DO NOT TRY TO CONNECT ELECTRICALLY
A ^A2
SEATING
PLANE
A1
R0.25 TYP
ALL AROUND
0.200 MIN
0° MIN
R0.13 MIN
0.13~0.30
e
C
b
α
L
GAUGE
PLANE
0.25 BASE
L1
T
ddd M C
DETAIL Y
MDP0055
14x20mm 128 LEAD MQFP (WITH AND WITHOUT HEAT
SPREADER) 3.2mm FOOTPRINT
DIMENSIONS
SYMBOL (MILLIMETERS)
REMARKS
A
Max 3.40 Overall height
A1
0.250~0.500 Standoff
A2
2.750 ±0.250 Package thickness
α
0°~7°
Foot angle
b
0.220 ±0.050 Lead width ₁
b1
0.200 ±0.030 Lead base metal width ₁
D
17.200 ±0.250 Lead tip to tip
D1
14.000 ±0.100 Package length
E
23.200 ±0.250 Lead tip to tip
E1
20.000 ±0.100 Package width
e
0.500 Base Lead pitch
L
0.880 ±0.150 Foot length
L1
1.600 Ref. Lead length
T
0.170 ±0.060 Frame thickness ₁
T1
0.152 ±0.040 Frame base metal thickness ₁
ccc
0.100
Foot coplanarity
ddd
0.100
Foot position
NOTES:
Rev. 2 2/07
1. General tolerance: Distance ±0.100, Angle +2.5°.
2. 1 Matte finish on package body surface except ejection and
pin 1 marking (Ra 0.8~2.0um).
3. All molded body sharp corner RADII unless otherwise specified
(Max RO.200).
4. Package/Leadframe misalignment (X, Y): Max. 0.127
5. Top/Bottom misalignment (X, Y): Max. 0.127
6. Drawing does not include plastic or metal protrusion or cutting
burr.
7. 2 Compliant to JEDEC MS-022.
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
37
FN7510.0
February 14, 2008